Table of Contents
Advertisement
Chapter 6 OPTION AND OTHERFUNCTIONS
6.2 EXTERNAL MONITOR OUTPUT
Through the additional interface, you can lead out the video signal to an external monitor. Additional external
port is using a DVI connector. External monitor's display pixels are 800x600 dots (SVGA). It is necessary that
power supply to the external monitor separately. Since the output screen is a vertical screen, use a monitor
that can hold the display vertically.
External monitor mounting
6.3 RECTIFIER UNIT
The input voltage range is from DC +10.8V to DC +31.2V. (DC12-24V, -10%+30%).
The power consumption varies depending on the radar model name. Check the maximum power
consumption described in the "12.4 GENERAL SPECIFICATIONS."
If ship's DC battery power supply is not enough to the operation of this radar, we strongly recommended that
to you use following option rectifier unit.
Rectifier unit NBA-5111:
Rectifier unit NBD-865:
128
If you installed the External monitor output, waterproofing (IPX5) of rear
side of display unit is no guaranteed.
Loosen the screws (2 pcs.), and remove the cover.
Connect DVI cable.
For JMA-3404, JMA-3406/HS and JMA-3412-4/4HS/6/6HS
For JMA-3404 and JMA-3406
Advertisement
Table of Contents
