Konica Minolta bizhub C658 Service Manual page 1613

bizhub C658/C558/C458/C368/C308/C258
9.32 Other
Error code Category
- Others
-
Contents of error
Despite the FAX board is installed in line
2, FAX (line 2) of [Service Mode] ->
[System 2] -> [Option Board Status] is
"Unset", if it is set to When the main body
is in the sleep mode, line 1 can not
receive faxes.
When the main body recovers from the
sleep mode while receiving a fax, the ring
tone is generated more than the set
number of times. (2 to 3 times)
K TROUBLESHOOTING > 9. FAX TROUBLE CODE
• When using the line 2, make sure that the FAX (system) for line
2 is set up correctly.
• When not using the line 2, remove all wirings of the FAX board
for line 2.
This error is avoidable with any one of the following settings.
• Set [Administrator Settings] -> [System Settings] -> [Power
Supply/Power Save Settings] -> [Power Consumption in Sleep
Mode] to "Disabled".
• Set [Administrator Settings] -> [Fax Settings] -> [Line
Parameter Setting] -> [Number of RX Call Rings] to "0 x".
K-285
How to correct