Konica Minolta bizhub C658 Service Manual page 1598

bizhub C658/C558/C458/C368/C308/C258
9.5 B13#
Error code Category
B130 Fax board
soft error
B131
B134
B135
B136
B137
B139
9.6 B14#
Error code Category
B141 Fax board
soft error
B142
B143
B144
B145
B146
9.7 B15#
Error code Category
B150 MFP soft
error
B151
B152
B153
B154
B158
9.8 B16#
Error code Category
B160 MFP soft
error
B162
B163
B165
B167 Image
processing
error
B168
B169
9.9 B17#
Error code Category
B170 MFP soft
error
B171
B173
B176 Memory
allocation
error
Contents of error
I/F error with main body (fax soft error)
I/F error with main body (reception frame
error)
I/F error with main body (sequence error)
I/F error with main body
ACK waiting timeout
I/F error with main body (RESET
reception from main body)
Modem responses waiting timeout (during
playing voice guidance when switching
between TEL and FAX)
* Destination of fax = Japan only
Contents of error
Fax soft error (received unexpected
command)
Fax soft error (received undefined
command)
Fax soft error (command frame length
error)
Fax soft error (parameter length error)
Fax soft error (received undefined
parameter)
Fax soft error (command/response
sequence error)
Contents of error
Program control error (instance
acquisition error)
Job start error
Doc access error
Program control error (logic error)
Program control error (table control error)
Job generation error
Contents of error
Program control error (instance
acquisition error)
Program control error (interface error)
Program control error (sequence error)
Program control error (table control error)
Sending image access error (image
acquisition error)
Receiving image access error (image
storage error)
Sending image access error (image
deletion error)
Contents of error
Program control error (table control error)
Program control error (instance
acquisition error)
Program control error (interface error)
Unable to secure domain for header (TTI)
image generation
K TROUBLESHOOTING > 9. FAX TROUBLE CODE
• Turn OFF and ON the main power switch.
• Use the latest FW.
• Acquire sysLogALL.
• Turn OFF and ON the main power switch.
• Use the latest FW.
• Acquire sysLogALL.
• Turn OFF and ON the main power switch.
• Acquire sysLogALL.
• Clear fax jobs by formatting the fax files.
• Use the latest FW.
• Disconnect and then connect the connector of the base board.
• Execute self-diagnosis for all items.
• Try replacing parts. Memory, storage (HDD, SSD, μSD) and
base board
• Turn OFF and ON the main power switch.
• Acquire sysLogALL.
• Clear fax jobs by formatting the fax files.
• Use the latest FW.
• Disconnect and then connect the connector of the base board.
• Execute self-diagnosis for all items.
• Try replacing parts. Memory, storage (HDD, SSD, μSD) and
base board
• Turn OFF and ON the main power switch.
• Acquire sysLogALL.
• Use the latest FW.
• Disconnect and then connect the connector of the base board.
• Execute self-diagnosis for all items.
• Try replacing parts. Memory, storage (HDD, SSD, μSD) and
base board
K-270
How to correct
How to correct
How to correct
How to correct
How to correct