Konica Minolta bizhub C658 Service Manual page 1526

bizhub C658/C558/C458/C368/C308/C258
Trouble isolation
Relevant electrical parts
(2) Procedure
1. Check the connectors on MFPB for proper connection and correct as necessary.
2. Replace MFPB. (bizhub C368/C308/C258
3.25.4 CE201 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
Trouble detection condition When the transmission log storage failed, it repeats retrial until transmission operation log is stored. The trouble
Trouble isolation
Relevant electrical parts
(2) Procedure
1. Check the connectors on MFPB for proper connection and correct as necessary.
2. Replace MFPB. (bizhub C368/C308/C258
3.25.5 CE301, CE302, CE303, CE304, CE305 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
Trouble detection condition Error occurred with the process inside the MFP controller.
Trouble isolation
Relevant electrical parts
(2) Procedure
1. Check the connectors on MFPB for proper connection and correct as necessary.
2. Replace MFPB. (bizhub C368/C308/C258
3. Acquire the debug logs in [Service Mode] -> [Debug Settings] and analyze them.
3.25.6 CED01 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
Trouble detection condition With "Enhanced Server Authentication" set, no authentication application registration information is found in the
Trouble isolation
Relevant electrical parts
(2) Procedure
1. Turn OFF and ON the main power switch.
2. Check the connector from MFPB to hard disk for proper connection and correct as necessary.
3. Check the connector from eMMC to MFPB for proper connection and correct as necessary.
4. Logically format the hard disk.
5. Replace the hard disk.
HDD (B) (bizhub C658/C558/C458))
6. If the above actions do not solve the problem, contact KM.
3.25.7 CEEE1, CEEE3 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type
Rank
• When the "Malfunction finish is detected over predetermined number of times" or "the browser task process
is except in idle (printing, etc)".
-
MFP board (MFPB)
/ bizhub C658/C558/C458)
CE201: Transmission operation log storage fault
C
is detected when the retrial failed for predetermined number of times.
-
MFP board (MFPB)
/ bizhub C658/C558/C458)
• CE301: Referring incorrect memory
• CE302: Incorrect command
• CE303: Finished due to error inside Qt library
• CE304: Finished due to error outside Qt library
• CE305: Program forced to stop
C
-
MFP board (MFPB)
/ bizhub C658/C558/C458)
CED01: The authentication application information does not exist in the hard disk/eMMC board in the enhanced
server authentication state.
C
hard disk or the eMMC board (eMMC).
-
• eMMC board (eMMC)
• Hard disk (A) (HDD (A))
• Hard disk (B) (HDD (B): HD-524)
(HDD (A) (bizhub C368/C308/C258)
• CEEE1: MFP board (MSC) malfunction
• CEEE3: MFP board (ENG) malfunction
C
/ HDD (A) (bizhub C658/C558/C458)
K-198
K TROUBLESHOOTING > 3. TROUBLE CODE
/ HDD (B) (bizhub C368/C308/C258) /