Disassembly Guide
Display PCB Removal/Replacement
Removal
74
WARNING: The LCD panel contains toxic chemicals. Do not ingest
chemicals from a broken LCD panel.
1. Complete the procedures in paragraphs Prior to Disassembly on page 64, and
Monitor Disassembly on page 65.
2. Disconnect the CCFL harness from J5 of the User Interface PCB. See
Figure 11.
3. Use a small blade screwdriver to pry the clip from either edge of J13, then
disconnect the Display PCB ribbon cable from the connector.
4. Separate the adhesive connection of the double-sided tape and lift the Display
PCB up to remove it from the top case.