Table of Contents
Advertisement
Data Port Interface Protocol
Column Heading
Data Source
Software Revision Level
Alarm Limits
118
To explain the printout, it is necessary to break it down to its key components. The
first two lines of the chart are the Column Headings shown below. Every 25th line
a Column Heading is printed. A column heading is also printed whenever a value
of the Column Heading is changed. There are three Column Headings shown in
Figure 17. The third Column Heading was printed because the SpO
changed from 85-100% to 80-100%.
Data in the highlighted box above represents the source of the printout or display,
in this case the N-595.
The next data field tells the user the software level (Version X.X.X.X) and a
software verification number (CRC XXXX). Neither of these numbers should
change during normal operation. The numbers will change if the monitor is
serviced and receives a software upgrade.
The last data field in the top line indicates the upper and the lower alarm limits for
%SpO
and for the pulse rate (PR). In the example above, the lower alarm limit
2
limits
2
Advertisement
Table of Contents
