Adult Default Settings
Service Functions
N-595
Table 3: Adult Alarm Factory Defaults
Monitoring Mode
Note: Bold entries are different than neonate default settings.
%SpO
Lower Alarm Limit
2
%SpO
Upper Alarm Limit
2
Alarm Silence Duration Off Setting
Alarm Silence Duration
Alarm Silence Reminder
Alarm Volume
Data Port Baud Rate
Data Port Protocol
Display Contrast
Display Format
O
M
Sensor Event Record Type
XI
AX
Language
Nurse Call Polarity
Pulse Beep Volume
Pulse Rate Lower Alarm Limit
inclusive
SatSeconds
Sensor Adjust Enabled
Trend Display
Service functions can be used to select institutional defaults and to access
information about the patient or instrument. Only a Nellcor Customer Service
Engineer should access some of the items available through the service functions.
These items will be noted in the text that follows.
Power-On Settings and Service Functions
Setting
85%
100%
Disabled
60 seconds
Enabled
7 of 10
9600
ASCII
Midrange
Pleth
SpO
2
English
Normally Low
4 of 10
40 beats per minute
170 beats per minute
Off
Yes
%SpO
2
37