Disassembly Guide
Replacement
Power Entry Module (PEM) Removal/Replacement
Removal
68
5. Connect the leads to the battery. The red wire connects to the positive
terminal, and the black wire connects to the negative terminal.
6. Insert the new battery into the bottom case with the negative terminal towards
the outside of the monitor. Install the bracket and grounding lead with the two
screws.
7. Complete the procedure in paragraph Monitor Assembly on page 66.
8. Turn the monitor on and verify proper operation.
1. Follow the procedure in paragraphs Prior to Disassembly on page 64, and
Monitor Disassembly on page 65.
2. Push the top of the Power Entry Module (PEM) in from the outside of the
case, and lift up.