Table of Contents
Advertisement
Adjust Contrast Up, Down
Clock Settings Lost
Data In O
M
Sensor
XI
AX
Data Type: SpO
2
Data Type: Event/SpO
Defaults Lost
Delete Trend?
Invalid Blip Vol
N-595
When the user attempts to adjust the contrast of the display by pressing or
pressing and holding the CONTRAST button.
If the N-595 detects that the real time clock has stopped running. This will usually
occur when both battery and AC power are lost.
When an O
M
sensor containing sensor event record data is connected to the
XI
AX
N-595.
When a blank O
M
sensor is connected to a monitor with Data Type set to
XI
AX
SpO
.
2
+BPM
2
When a blank O
M
sensor is connected to a monitor with Data Type set to
XI
AX
SpO
+ BPM.
2
If the N-595 detects that the power-on settings have been lost.
When the user attempts to delete trend data from memory by pressing the
DELETE softkey.
When the user attempts to save current settings as power-on defaults and the blip
volume is 0.
Troubleshooting
61
Advertisement
Table of Contents
