Table of Contents
Advertisement
A
Image 27-131
Light pipe assembly removal
2. Carefully place the light pipe assembly onto the projector frame border.
All screws for the light integration rod removal are accessible.
3. Loosen the 2 hexagon socket screws (A) , using an 1.5 mm ballpoint Allen key, clamping the rod inside the light pipe.
Image 27-132
Light integration rod removal
4. Remove the cross head screw (B), using the small cross head screwdriver, securing the light integration rod onto the light pipe.
5. Slide the light integration rod out the light pipe.
27.6.2.4 Installation of the Light Integration Rod
Necessary tools
•
Small cross head screwdriver
•
Ballpoint Allen key 1,5 mm and 2 mm
R5976820 SLM R12+ PERFORMER 08/03/2005
A
A
27. Maintenance
251
Advertisement
Table of Contents
