24. PROJECTOR TILT SWITCH R764240
24.1 View of the projector Tilt Switch
Location of the module
View inside lamp house
Image 24-1
Location of the tilt switch module
24.2 Projector Tilting Protection
Explanatory Drawing
In a projector mounting configuration where tilting of the projector is required, pay attention to the followings mountings rules to
maintain maximum performances of the Xenon lamp:
•
Tilting the projector according the projection axis has no restrictions.
•
Tilting the projector according the lamp axis is limited. As a rule of thumb, the cathode of the Xenon lamp in the mounting
configuration may not be positioned 15° (maximum) higher than the anode.
R5976820 SLM R12+ PERFORMER 08/03/2005
24. Projector Tilt Switch R764240
169