Table of Contents
Advertisement
8. Local Keypad & LCD Display
Info Display
LCD Display
- L
ERROR(-2740)
LAMP POWER SUPPLY
- L
ERROR(-2750)
LAMP POWER SUPPLY
- L
ERROR(-2751)
LAMP POWER SUPPLY
- L
ERROR(-2752)
LAMP POWER SUPPLY
- L
ERROR(-2753)
LAMP POWER SUPPLY
- L
ERROR(-2801)
START PFC NOT OK
- L
ERROR(-2802)
START LPS NOT OK
- L
ERROR(-2803)
START BOOST NOT OK
- L
ERROR(-2806)
LAMP IGNITION FAILED
- L
ERROR(-2807)
LAMP VOLTAGE OUT RANGE
- L
ERROR(-2808)
LAMP POWER OUT RANGE
- L
ERROR(-2809)
OVERTEMP IN LPS
- L
ERROR(-2810)
HTSNK OVERTEMP LPS
- L
ERROR(-2811)
AMBIENT OVERTEMP LPS
- L
ERROR(-2812)
FAN ERROR LPS
- P
ERROR(-3001)
SMPS FAILED
- P
ERROR(-3002)
SMPS START FAILED
- P
ERROR(-3003)
SMPS OUTPUT SHORTED
- P
ERROR(-3004)
TOP FAN ERROR
- P
ERROR(-3005)
ANODE FAN ERROR
50
Error Description
LPS with I
2
C slave address 0x28: "Error mains" signal from SMPS
module has shut down the LPS module.
LPS with I
2
C slave address 0x28: Over-temperature on heatsink mains
rectifier.
LPS with I
2
C slave address 0x28: Over-temperature on heatsink PFC
and LPS primary.
2
LPS with I
C slave address 0x28: Over-temperature in transformer LPS.
LPS with I
2
C slave address 0x28: Over-temperature on heatsink LPS
secondary diode.
LPS with I
2
C slave address 0x28: Start-up of the PFC module failed.
LPS with I
2
C slave address 0x28: Start-up of the LPS module failed.
2
LPS with I
C slave address 0x28: Start-up of the BOOST module failed.
LPS with I
2
C slave address 0x28: Ignition of the lamp failed.
LPS with I
2
C slave address 0x28: The voltage at the lamp is too high.
LPS with I
2
C slave address 0x28: The power at the lamp is too high.
LPS with I
2
C slave address 0x28: Temperature in LPS is too high.
2
LPS with I
C slave address 0x28: Heatsink temperature in LPS is too
high..
LPS with I2C slave address 0x28: Ambient Temperature in LPS is too
high.
LPS with I
2
C slave address 0x28 :Fan error
The SMPS has unexpectedly shut down.
Unable to start the SMPS.
The output of the SMPS is shorted.
The Fan on top of the lamp is not working.
The Fan at the anode of the lamp is not working.
R5976820 SLM R12+ PERFORMER 08/03/2005
Advertisement
Table of Contents
