Power Distribution Backplane R764239; General Info - Barco SLM R12 Plus Service Manual

14. POWER DISTRIBUTION BACKPLANE R764239

14.1 General Info

View of the Power Distribution Backplane
Image 14-1
View of the Power distribution backplane
Short description
The Power distribution backplane routes through the different logical signals and provides power to the respective modules ( Mounted
in the Electronic Box). The Power distribution backplane is on one side connected to the SMPS via a 8-pins and a 48-pins Euro
connector and on the other side connected to the Electronic Box via four 8-pins Euro connectors.
Via wire units, plugged in on the rear of the backplane, power is supplied to the temperature & motor control module and the different
FANs in the projector.
A quad bi-directional translating switch, controlled via the I2C -bus, ensure correct data communication to Lamp Info module, Temp.
& Motor control and Tilt switch.
R5976820 SLM R12+ PERFORMER 08/03/2005
14. Power Distribution Backplane R764239
Power Distribution Backplane R764239
Rear view
Front view
89