Engine Replacement; Safety Instructions; General - Barco SLM R12 Plus Service Manual

Convergence screw is end of course
1. Convergence screw is end of course
A
Image 27-64
Readjustment plunger
2. Continue with the fine convergence adjustment
Convergence screw sense no resistance
1. Turn the plunger clockwise until resistance is sensed again.
A
Image 27-65
Readjustment plunger
2. Continue with the fine convergence adjustment

27.5 Engine Replacement

27.5.1 Safety Instructions

27.5.1.1 General

Who may perform the installation ?
This installation must be performed by authorized technical personnel only.
Authorized technical personnel : persons having appropriate technical training and experience necessary to be aware of hazards to
which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons.
Cautions
Before attempting to remove any to the projector's covers, the projector has to be turned off and disconnected from the wall outlet
to minimize the risk of electric shock.
Before starting with the Replacement of the Engine, always let cool down the projector after operation in order to reduce the heat
on parts in the light path and to avoid burns.
Eye warning
Eye damage may result from direct viewing the light produced by the lamp used in this equipment. Always turn off the lamp before
opening cover.
R5976820 SLM R12+ PERFORMER 08/03/2005
B
B
27. Maintenance
217