Removing The Top Cover - Barco SLM R12 Plus Service Manual

27.4.2.1.3 Removing the top cover

Removal of the stacking points
1. Loosen the fixation bolt of the 3 stacking points on top of the projector, using an Allen key of 8 mm.
Image 27-38
Removal of the stacking points
2. Remove the 3 stacking points upwards.
Loosening the top cover fixation spring screws
1. Loosen 2 spring screws (3 & 4), holding front of top cover to projector main frame.
2
Image 27-39
Top cover fixation spring screws loosening
2. Loosen 1 spring screws (1), holding upper side of top cover to projector main frame.
3. Loosen 1 spring screws (2), holding side of top cover to projector main frame.
Disconnection of the dust protection cloth
1. Hold the lens with one hand and move the lens lock clockwise (picture A).
R5976820 SLM R12+ PERFORMER 08/03/2005
1
3
27. Maintenance
4
201