Mounting The Ir Receiver Unit - Barco SLM R12 Plus Service Manual

28. Upgrade with Air Filters
C
B
A
Image 28-20
Mounting the stacking interlocks
2. Slide the metallic tube (B) over the stacking rod, the longest tube on the front (A1) and the shortest on the side (A2) mounted
stacking interlock.
3. Secure the tube from siding off when adjusting the stacking interlock by insertion of the screw (C) on top of the interlock rod.

28.3.2.6 Mounting the IR Receiver Unit

Why a new IR Receiver module
The air filters in the projector rear cover disables the built-in IR receiver. For that reason a new IR Receiver, revited on a metal plate,
has to be mounted (added to the kit).
Necessary tools
• Open ended spanner 10 mm
• Torx T10
• Flat blade screwdriver 5 mm
Access for mounting
1. Disconnect the Lamp Power supply.
268
B
A
2
A
1
C
R5976820 SLM R12+ PERFORMER 08/03/2005