Table of Contents
Advertisement
27. Maintenance
Image 27-2
Removal front plate lens block
2. Remove the lens holder front plate from the fixation bolts.
3. Remove the 4 springs (A) and the 3 washers (D) from the fixation bolts (to be reused when reassembling)
Tilting the Lens block X-Y Plate
1. Loosen the 2 hexagon socket screws (A) securing the hinge (B) into place.
Image 27-3
Hinge removal
2. Pull out the hinge.
3. Remove the 2 screws (C) fixing motor axle block (D) onto lens block X-Y plate.
182
A
B
C
D
E
B
A
R5976820 SLM R12+ PERFORMER 08/03/2005
Advertisement
Table of Contents
