Table of Contents
Advertisement
27. Maintenance
The dust filter is released and can be removed (C) for cleaning or replacement.
C
Image 27-11
Removing dust filter from its casing
How to clean!
1. Put the dirty air filter far away from the projector or preferable in another room.
2. Brush most of the dust off with a soft brush and/or blow dust away with compresses air.
Tip:
Always replace damaged and/or too dirty air filters by a new one.
How to reinstall the cleaned or new air filter
1. Slide the air filter (A) in its casing and hold it in place with one hand (B).
Image 27-12
2. Secure the position of the air filter in its casing by tightening the 4 captive screws (C).
27.2.2.2 Dust filters on the rear side of the projector
Access to the air filters
To access the air filters on the rear of the projector, first the projector rear cover has to be removed.
Necessary tools
Allen key of 3 mm
Removal of the projector rear cover
1. Turn the 3 captive screws, securing rear cover to projector frame, half a turn counterclockwise.
188
A
C
R5976820 SLM R12+ PERFORMER 08/03/2005
B
Advertisement
Table of Contents
