Replacement Procedure; Removing The Air Channel Unit - Barco SLM R12 Plus Service Manual

27.6.2 Replacement procedure

Overview
•

Removing the air channel unit

• Removing the start pulse generator
• Removal of the Light Integration Rod
• Installation of the Light Integration Rod
27.6.2.1 Removing the air channel unit
W
ARNING
electric shock.
W
ARNING
path and to avoid burns.
Necessary tools
• Flat blade screwdriver of 5 mm
• Torx® driver TX10
• Nut driver of 5,5 mm
• Nut driver of 7 mm
How to remove the air channel unit
1. Remove the small L shape metal support plate, fixating air channel to frame, by releasing three Torx® TX10 screws.
Image 27-123
2. Disconnect the two fan cables on top of the unit and the three engine ground leads.
R5976820 SLM R12+ PERFORMER 08/03/2005
:
The projector has to be turned off and disconnected from the wall outlet to minimize the risk of
:
Always let the projector cool down after operation in order to reduce the heat on parts in the light
27. Maintenance
247