Reinstalling The Side Panel - Barco SLM R12 Plus Service Manual

2
Image 27-115
Top cover fixation spring screws loosening
2. Fasten 1 spring screws (2), holding side of top cover to projector main frame.
3. Fasten 2 spring screws (3 & 4), holding front of top cover to projector main frame.
Mounting the stacking points
1. Insert the 3 stacking points on to the top cover.
2. Tighten the fixation bolt of the 3 stacking points, using an Allen key of 8 mm or a hex ball driver.
Connection of the dust protection cloth
1. Attach the dust protection cloth to the lens frame by inserting the 5 push fasteners..
Image 27-116
Fastening dust cloth lens

27.5.5.5 Reinstalling the Side Panel

Necessary tools
A flatblade screwdriver of 5 mm
R5976820 SLM R12+ PERFORMER 08/03/2005
1
3
27. Maintenance
4
243