Connecting The Engine Fans - Barco SLM R12 Plus Service Manual

Image 27-94
Cable gap in optical base
2. Push the long black wires (power supply wires) of engine through the same gap.
3. Pull the wires through gap A and push them one for one through the pass-through (B) in the side plate of the input panel.
A
Image 27-95

27.5.4.3 Connecting the engine fans

Necessary tools
Torx® driver TX10
Engine signal connection
1. Push the short black cables through the gap between the formatter interface board and metal plate.
2. Plug in the connectors in the respective sockets. The cables are labelled with a colored wire tire.
R5976820 SLM R12+ PERFORMER 08/03/2005
B
27. Maintenance
233