Table of Contents
Advertisement
27. Maintenance
to Open
Image 27-40
Removal Lens and dust cloth
The lens lock is unlocked and the lens can be removed from lens block.
2. Disconnect the dust protection cloth ring from lens block by pulling the ring backwards (picture B).
Removal of the top cover
1. Lift up the top cover to remove.
Image 27-41
Top cover removal
2. Put back the Input Panel box (see "Removing the Input Assembly", page 200).
27.4.2.2 Disconnection Fans on Light Engine
Overview
•
Removing the Prism Cooling Fan
•
Removing the Engine Cooling Fan
•
Electrical disconnection of the Fans
27.4.2.2.1 Removing the Prism Cooling Fan
Removal
To access the adjustable screws of the Green and the Blue DMD panel, the prism cooling fan has to be removed.
1. Remove the 3 screws holding the Fan to light engine frame.
202
to Lock
A
1
2
3
5
4
R5976820 SLM R12+ PERFORMER 08/03/2005
B
Advertisement
Table of Contents
