Related Manuals for Barco SLM R6 Executive
Summary of Contents for Barco SLM R6 Executive
- Page 1 All manuals and user guides at all-guides.com BARCO PROJECTION SYSTEMS SLM R6 Executive R9002790 OWNER'S MANUAL Date: 06.09.2001 Rev.: 00 Art. No.: R5976336...
- Page 2 Produced by BARCO NV, September 2001. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...
-
Page 3: Table Of Contents
All manuals and user guides at all-guides.com TABLE OF CONTENTS TABLE OF CONTENTS ......................I-1 SAFETY INSTRUCTION RELATED TO SLM PROJECTORS ......... 1-1 Warnings ..............................1-1 Federal Communication Commission ......................1-1 Note ................................1-2 PACKAGING AND DIMENSIONS ..................2-1 Projector Packaging ............................ 2-1 Lens Packaging ............................ - Page 4 All manuals and user guides at all-guides.com Input Source Connection ..........................4-3 Optional: Serial Digital Input (slot 3 & 4) ...................... 4-7 HD SDI Digital Input (slot 3 & 4) ........................4-8 Communication Connections ........................4-9 RS232 Connections ............................ 4-9 Communication port for communication with peripherals.
- Page 5 All manuals and user guides at all-guides.com RANDOM ACCESS ADJUSTMENT MODE ..............7-1 Random Access Mode ..........................7-1 Picture Service ............................7-2 Load File ..............................7-3 Edit File ..............................7-4 Rename a file .............................. 7-6 Copy a file ..............................7-7 Delete .................................
- Page 6 All manuals and user guides at all-guides.com Shift ................................7-14 Size ................................7-14 Blanking ..............................7-15 Aspect Ratio .............................. 7-16 INSTALLATION MODE ...................... 8-1 Installation Mode ............................8-1 Input Slots ..............................8-1 800 Peripheral ............................. 8-2 Convergence ............................... 8-3 Configuration ............................... 8-4 OSD color (On-Screen Display) ........................
- Page 7 All manuals and user guides at all-guides.com Change Language ............................9-5 Change Projector Address ........................... 9-5 Serial Communication ..........................9-5 Lamp ................................9-7 BARCO logo ............................... 9-7 Add-Ins ............................... 9-8 Preset Input Balance ........................... 9-9 Diagnosis..............................9-9 I2C Diagnosis ............................. 9-10 Formatter ..............................
- Page 8 All manuals and user guides at all-guides.com...
-
Page 9: Safety Instruction Related To Slm Projectors
To prevent personel injury The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to BARCO. To prevent injuries and physical damage, always read this manual and all labels on the system before connecting to the wall outlet, or adjusting the projector. -
Page 10: Note
All manuals and user guides at all-guides.com Safety Note Definitions Definition Qualified service technicians or Qualified technicians : Persons having appropiate technical training and experience necessary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons. -
Page 11: Packaging And Dimensions
Contents of the complete unit (box) : - 1 BARCO SLM R6 (weight ± 56 kg, 123.5 lbs) - 1 remote control unit RCU + 1 battery - 1 power cable. -
Page 12: Lens Packaging
All manuals and user guides at all-guides.com Packaging and Dimensions Lens Packaging Way of Packaging Lenses are supplied as an individual item. They are packed in a carton. Projector Case Dimensions The dimensions are given in mm ASPIUÃWD@X ,5 UHFHLY HU 25.4 mm = 1"... -
Page 13: Installation Guidelines
All manuals and user guides at all-guides.com Installation Guidelines INSTALLATION GUIDELINES Installation Guidelines Ambient Temperature Conditions Humidity Conditions Environment Environment condition check clean air well Special care for Laser beams Which screen type? -
Page 14: Projector Configurations
All manuals and user guides at all-guides.com Installation Guidelines For more information about screens, contact your local screen supplier. What image size? How big should the image be? Projector Configurations Which configuration can be used. )URQW&HLOLQJ 5HDU&HLOLQJ 5HDU7DEOH )URQW7DEOH Image 1 Positioning the Projector Definitions of the Abbreviation on drawings... - Page 15 All manuals and user guides at all-guides.com Installation Guidelines U hi yr Æ ‡h q vt T D9 @ÃWD@X T p …r r Q…‚ wrp‡‚… P ƒ ‡vphyÃh‘v†Ãƒ …‚wrp‡v‚ Ãyr† Ay‚‚… 89Ã2ÃTC!ÃÃ7ÃÃ6 " ( Q ‚ v ‡Ã‚ sÃt … h ‰ v‡ ’ "...
- Page 16 All manuals and user guides at all-guides.com Installation Guidelines Safety Area around the Projector à P ’ v ‡ ‰ … s à ‚ ‡ à v ‚ Safety area for blow out hot air Image 6 Re-adjusting the lamp position in the lamp casing Image 7...
-
Page 17: Lenses
All manuals and user guides at all-guides.com Installation Guidelines Lenses Which Lens has to be selected. Available lenses Lens formulas to calculate the projector distance... - Page 18 All manuals and user guides at all-guides.com Installation Guidelines Installing the Projection Lens Attention avoid sliding off from the table Image 8 Image 9 Image 10...
-
Page 19: Battery Installation In The Rcu
All manuals and user guides at all-guides.com Installation Guidelines Cleaning the lens Battery installation in the RCU. How is the battery delivered ? How to install ? D ' 5 : Image 15... -
Page 20: Connections
All manuals and user guides at all-guides.com Connections CONNECTIONS Power Connection to Projector AC Power (mains) cord connection Use the supplied power cord to connect the projector to the wall outlet. Plug the female power connector into the black male connector on the side of the projector. - Page 21 When OK (ENTER) is pressed to go on, the warning will be repeated every 30 min. The total lifetime of the lamp for a safe operation is 1500 hours max. Do not use it longer. Always replace with a same type of lamp. Call a BARCO authorized service technician for lamp replacement. Lamp Runtime Warning Using a lamp for more than 1500 hours is dangerous as the lamp could explode.
-
Page 22: Input Source Connection
All manuals and user guides at all-guides.com Connections Input Source Connection Input facilities 9vh t ‚†‡vp Ã8 ‚ qr D SSr p r v‰r… B… rr ÃPƒr …h‡ v ‚ Sr qà T‡h qi ’ U‚à h’ Ch …qv…r q u h…... - Page 23 All manuals and user guides at all-guides.com Connections Input module insertion into the projector To insert a module in one of the free slots, handle as follow : Power down the projector and disconnect the power cord from the wall outlet. Remove the dummy plate covering the chosen input slot by turning out both screws.
- Page 24 All manuals and user guides at all-guides.com Connections Fixed Slot (slot 1 & 2) Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through to a second projector.
- Page 25 All manuals and user guides at all-guides.com Connections How to change the input slot setting Press ADJUST or ENTER key to start up the Adjustment mode. Push the cursor key é or ê to select Installation (menu 1) Press ENTER. Press the cursor key é...
-
Page 26: Optional: Serial Digital Input (Slot 3 & 4)
All manuals and user guides at all-guides.com Connections Optional: Serial Digital Input (slot 3 & 4) What can be connected to this input ? This input is full compatibility with digital Betacam, or other digital video sources. This avoids the need for analog video processing anywhere in the video production chain and guarantees the ultimate image quality. An active loop-through of the SDI input signal is provided for monitoring or for double and or triple stacking applications. -
Page 27: Hd Sdi Digital Input (Slot 3 & 4)
All manuals and user guides at all-guides.com Connections HD SDI Digital Input (slot 3 & 4) What can be connected to this input ? This input is full compatible with HD digital sources. This avoids the need for analog video processing anywhere in the video production chain and guarantees the ultimate image quality. An active loop-through of the HD SDI digital input signal is provided for monitoring or for double and or triple stacking applications. -
Page 28: Communication Connections
Connections Communication Connections Available communication connections : RS232/422 connection between projector and computer. Communication port for communication with BARCO peripherals. Trigger output RS232 Connections RS 232/422 input and RS232/422 output of the projector. The projector has a RS232/422 input port that allows it to communicate with a computer. - Page 29 All manuals and user guides at all-guides.com Connections...
-
Page 30: Getting Started
All manuals and user guides at all-guides.com Getting Started GETTING STARTED Remote Control & Local Keypad Functionality (;,7 (17(5 67%< 3$86( 7(;7 )5((= +(/3 3+$6( " 6+$531(66 7,17 (;,7 67$1'%< &2/25 (17(5 %5,*+71(66 7(;7 3$86( &2175$67 6+$531 7,17 %5,*+71 3+$6( &2/25 &2175$67... - Page 31 All manuals and user guides at all-guides.com Getting Started Terminology Barco key : ADJ. STBY PAUSE Help : Digit buttons Picture controls PHASE 10 TEXT 11 FREEZ 12 ENTER 13 EXIT 14 Cursor Keys '+' and '-' keys '+' and '-' keys...
-
Page 32: Operating The Projector
All manuals and user guides at all-guides.com Getting Started Operating the Projector Switching on (;,7 ( 17(5 67%< 3$86( 7( ;7 )5((= +( /3 " 3+$6( 6+$531 (66 7,17 &2/25 (;,7 67$1'%< %5,* +71(66 (17(5 &2175$67 7(;7 3$86( 6+$531 7,17 %5,*+71 3+$6( &2/25... -
Page 33: Quick Set Up Adjustments
All manuals and user guides at all-guides.com Getting Started Lamp Light Output Indication ENTER WARNING Lamp run time is 1400 hours. The light output of the lamp is less than 50% of its initial value. It is advisable to replace the lamp before damage occurs. - Page 34 All manuals and user guides at all-guides.com Getting Started Quick Lens Adjustment é ê ç è EXIT ENTER LENS ADJUSTMENT ZOOM/FOCUS ZOOM with éor ê FOCUS with çor è <ENTER> to Shift <EXIT> to return ENTER é ê ç è EXIT ENTER LENS ADJUSTMENT SHIFT...
-
Page 35: Using The Rcu
All manuals and user guides at all-guides.com Getting Started Quick On Screen Color change ENTER é ê ENTER é ê ENTER é ê ENTER ADJUSTMENT MODE INSTALLATION OSD COLOR HIGHLIGHTED ITEM Select a path from below : INPUT SLOTS 800 PERIPHERALS CONFIGURATION GREEN RANDOM ACCESS... - Page 36 All manuals and user guides at all-guides.com Getting Started Hardwired Remote Input 9vh t ‚†‡vp Ã8 ‚ qr D SSr p r v‰r… B… rr ÃPƒr …h‡ v ‚ Sr qà T‡h qi ’ U‚à h’ Ch …qv…r q u h…...
-
Page 37: Projector Address
All manuals and user guides at all-guides.com Getting Started Directly to the IR Sensors DS Ær†‚… DSÆr†‚… 7DEOH Tvq rÂsÃ…‚wrp‡‚ … S rh… sÃ…‚wrp‡‚… A …‚ ‡Ã‚ sÃ…‚ wrp ‡‚ … ƒ ƒ ƒ ƒ ƒ ƒ 6 9E @ Y D U ( 17 (5 6 99 S ) 5( (=... -
Page 38: Controling The Projector
All manuals and user guides at all-guides.com Getting Started Display the Projector Address on the Screen ADDRESS PROJECTOR ADDRESS How to Program an Address into the RCU ? ADDRESS Controling the Projector Input Selection Picture Contols Brightness Control 'brightness' Contrast Control Color Saturation Tint Control Sharpness Control. - Page 39 All manuals and user guides at all-guides.com Getting Started Phase Control The Pause key. The Stand-by key.
-
Page 40: Start Up Of The Adjustment Mode
All manuals and user guides at all-guides.com Start up of the Adjustment Mode START UP OF THE ADJUSTMENT MODE Adjustment Mode Start up All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode'. Press the ADJUST or ENTER key to enter the 'Adjustment mode'. - Page 41 All manuals and user guides at all-guides.com Start up of the Adjustment Mode When the password is correct, you gain access to the selected item. When the password is wrong. The error message "Invalid password" is displayed on the screen. Press EXIT to continue and to return to the Service menu.
-
Page 42: Random Access Adjustment Mode
All manuals and user guides at all-guides.com Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE Random Access Mode Starting up ENTER ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with é or ê then <ENTER>... -
Page 43: Picture Service
All manuals and user guides at all-guides.com Random Access Adjustment Mode Picture Service Connecting a new Source. Start up the File Service. é ê ENTER EXIT ADJUST RANDOM ACCESS FILE SERVICE ADJUSTMENT MODE LOAD FILE SERVICE EDIT PICTURE TUNING RENAME GEOMETRY COPY DELETE... -
Page 44: Load File
All manuals and user guides at all-guides.com Random Access Adjustment Mode Load File Start up the Load File. é ê ENTER è ç ENTER FILE SERVICE LOAD FILE FILTER LIST [All] LOAD Filename Resolution EDIT ----------------------------------------------------- RENAME Video525.s01 1 675x240i COPY Video525.c01 1 675x240i... -
Page 45: Edit File
All manuals and user guides at all-guides.com Random Access Adjustment Mode Edit File What can be done with the Edit File menu ? How to start up the EDIT menu ? é ê ENTER ENTER FILE SERVICE EDIT FILE LOAD Filename Resolution EDIT... - Page 46 All manuals and user guides at all-guides.com Random Access Adjustment Mode How to find the correct values for the displayed item? Caution : Do not adjust these settings on an active file, they are used to identify the input source file. "Horizontal Total Pixels"...
-
Page 47: Rename A File
All manuals and user guides at all-guides.com Random Access Adjustment Mode Field Polarity ENTER Field Select ENTER Vertical Refresh [sync/async] EXIT CONFIRM EDIT FILE Save changes to file xga.c30? <ENTER> to confirm <EXIT> to return ENTER EXIT Rename a file Start Up. -
Page 48: Copy A File
All manuals and user guides at all-guides.com Random Access Adjustment Mode How to change the characters ? ç è é ê ENTER EXIT RENAME FILE Frome file name : Video525.s01 To file name : demo.c10 Select with ç or è Reprogram with é... -
Page 49: Delete
All manuals and user guides at all-guides.com Random Access Adjustment Mode Delete Start Up é ê ENTER é ê ENTER ENTER EXIT FILE SERVICE DELETE FILE CONFIRM DELETE FILE LOAD Filename Resolution EDIT ----------------------------------------------------- Delete file: RENAME Video525.s01 1 675x240i Video525.c01? COPY Video525.c01 1... -
Page 50: Picture Tuning
All manuals and user guides at all-guides.com Random Access Adjustment Mode Picture Tuning Start Up é ê ENTER PICTURE TUNING RANDOM ACCESS ADJUSTMENT MODE CTI [ON] COLOR TEMPERATURE FILE SERVICE GAMMA PICTURE TUNING DECODING [EBU] GEOMETRY DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with é... -
Page 51: Color Temperature
All manuals and user guides at all-guides.com Random Access Adjustment Mode Color Temperature Start Up é ê ENTER PICTURE TUNING COLOR TEMPERATURE CTI [ON] PROJECTOR WHITE COLOR TEMPARATURE COMPUTER 9300K GAMMA VIDEO 6500K DECODING [EBU] FILM 5400K DYNAMIC COLOR DEPTH BROADCAST 3200K NOISE REDUCTION... -
Page 52: Decoding Ebu/Ire
All manuals and user guides at all-guides.com Random Access Adjustment Mode How to change the Gamma Value ? é ê ENTER ç è EXIT PICTURE TUNING GAMMA = 2.2 CTI [ON] COLOR TEMPERATURE GAMMA menu 3 DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with é... -
Page 53: Noise Reduction
All manuals and user guides at all-guides.com Random Access Adjustment Mode Noise Reduction Purpose : To change the noise reduction value : é ê ENTER ç è EXIT PICTURE TUNING NOISE REDUCTION CTI [ON] COLOR TEMPERATURE GAMMA menu 2 DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE... -
Page 54: Geometry
All manuals and user guides at all-guides.com Random Access Adjustment Mode How to adjust the input balance for YUV input signals? Important é ê é ê ENTER é ê ç è PICTURE TUNING INPUT BALANCE INPUT BALANCE CTI [ON] WHITE BALANCE WHITE BALANCE COLOR TEMPERATURE BLACK BALANCE... -
Page 55: Shift
All manuals and user guides at all-guides.com Random Access Adjustment Mode Shift What can be done ? To start up the shift action : é ê ENTER é ê ç è GEOMETRY SHIFT SIZE BLANKING ASPECT RATIO [4:3] Select with é or ê then <ENTER>... -
Page 56: Blanking
All manuals and user guides at all-guides.com Random Access Adjustment Mode Blanking What can be done ? Available Blanking Adjustment. U‚ƒÃiyhxvt Svtu‡Ãiyhxvt Grs‡Ãiyhxvt 7‚‡‡‚€Ãiyhxvt Adjusting the blanking. é ê ENTER é ê ENTER BLANKING GEOMETRY SHIFT BOTTOM SIZE LEFT BLANKING RIGHT ASPEC RATIO [4:3] Select with é... -
Page 57: Aspect Ratio
All manuals and user guides at all-guides.com Random Access Adjustment Mode Aspect Ratio What can be done? Setting Up the Aspect Ratio. é ê ENTER GEOMETRY SHIFT SIZE BLANKING ASPEC RATIO [4:3] Select with é or ê then <ENTER> <EXIT> to return. menu 1... -
Page 58: Installation Mode
All manuals and user guides at all-guides.com Installation Mode INSTALLATION MODE Installation Mode Start Up Push the cursor key é or ê to highlight 'Installation Mode' and then press ENTER. ADJUSTMENT MODE INSTALLATION Select a path from below : INPUT SLOTS 800 PERIPHERAL CONVERGENCE RANDOM ACCESS... -
Page 59: 800 Peripheral
All manuals and user guides at all-guides.com Installation Mode Component video Component Video - SS : component video with separate sync Component Video - SOY : component video with sync on Y Component Video - 3LSS : component video with 3 level separate sync. Component Video - 3LSOY : component video with 3 level sync on Y. -
Page 60: Convergence
All manuals and user guides at all-guides.com Installation Mode Defining the Infrared Communication protocol When a peripheral is connected to the 'Comm Port', the communication can be in PPM or RC5. The type of communication can be set to : - PPM - RC5 To define the communication :... -
Page 61: Configuration
All manuals and user guides at all-guides.com Installation Mode Configuration What can be done ? The way of physical installation of the projector can be defined to the projector. The following installation configurations are possible : - front/table - front/ceiling - rear/ceiling - rear/table Set up the Correct Configuration... -
Page 62: No Signal
All manuals and user guides at all-guides.com Installation Mode No Signal What will happen If there is no signal connect to the projector, - the background color can be black or blue and - the projector can shutdown after a certain time. Changing the Background Color To change the background color handle as follow : Push the cursor key é... -
Page 63: Internal Patterns
All manuals and user guides at all-guides.com Installation Mode Internal Patterns What can be done with these internal patterns ? The projector is equipped with different internal patterns which can be used for measurment and alignment purposes. How to select an internal pattern ? Push the cursor key é... - Page 64 All manuals and user guides at all-guides.com Installation Mode Zoom/Focus/Shift Within the displayed pattern it is possible to adjust the Zoom/Focus and the Shift. Use the ENTER key to toggle between Zoom/Focus and Shift operation. How to Zoom/Focus ? Push the cursor key é or ê to select Zoom/Focus (menu 1) Push the cursor key é...
-
Page 65: Quick Access Keys
All manuals and user guides at all-guides.com Installation Mode Options The zoom/focus and shift can be set the same for all files. Push the cursor key é or ê to highlight 'Options' (menu 1). Press ENTER to select. The Lens Options menu will be displayed (menu 2). Press ENTER to toggle between 'Yes' or 'No'. -
Page 66: Menu Position
All manuals and user guides at all-guides.com Installation Mode Menu Position What can be done ? The adjustment menus can be displayed in the corner or in the middle of the image. How to set up? Push the cursor key é or ê to highlight 'Menu Position' (menu 1). Press ENTER to toggle between [DEFAULT] and [CENTER]. - Page 67 All manuals and user guides at all-guides.com Installation Mode...
-
Page 68: Service Mode
All other password protected items are now available if you stay in the adjustment mode. ADJUSTMENT MODE SERVICE SERVICE Select a path from below : IDENTIFICATION BARCO LOGO CHANGE PASSWORD ADD INS CHANGE LANGUAGE PRESET INPUT BALANCE RANDOM ACCESS CHANGE PROJ. ADDRESS... -
Page 69: Identification
- projector serial number - projector run time Detailed description - type of projector : BARCO SLM R6 - software version - Proj. Address : to change the address of the projector, see Change Projector Address in this chapter. - Installation : possible installations :... -
Page 70: Change Password
All manuals and user guides at all-guides.com Service Mode - Projector Run Time : gives the total run time since the first start up. All projectors leave the factory with a run time of approximately 24 hours. - Projector Serial number : indicates the fabrication number of the projector. This number can be useful when calling for technical assistance. - Page 71 CHANGE PASSWORD OWNER 0000 CHANGE LANGUAGE USER 0000 Adjustment mode Y Y Y Y CHANGE PROJ. ADDRESS GUEST 0000 Barco logo Y - - - SERIAL COMMUNICATION Change Proj. Address Y Y - - LAMP ACCESS CONTROL LIST MORE... Select with é or ê...
-
Page 72: Change Language
All manuals and user guides at all-guides.com Service Mode Change Language Start Up Push the cursor key é or ê to highlight 'Change Language' (menu 1). Press ENTER to display the language selection menu (menu 2). Available languages : English SERVICE CHANGE LANGUAGE CHANGE LANGUAGE... - Page 73 All manuals and user guides at all-guides.com Service Mode Setting up the Baud rate To change the baud rate, handle as follow : Push the cursor key é or ê to highlight 'Baudrate' (menu 1). The actual baud rate will be displayed. Press ENTER to toggle between the available baudrates.
-
Page 74: Lamp
Push the cursor key é or ê to highlight 'BARCO logo' (menu 1). Press ENTER to select. The BARCO logo menu will be displayed on the screen (menu 2. Within this menu, three toggle settings and a shift control are available. -
Page 75: Add-Ins
OFF : no key on the RCU is used to display the BARCO logo. TEXT : the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in operational : mode). -
Page 76: Preset Input Balance
When Preset Input Balance is selected in the Service Mode selection menu, the following warning will be displayed : Preset Input Balance is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the preset input balance. SERVICE WARNING BARCO LOGO ADD-INS PRESET INPUT BALANCE DIAGNOSIS PRESET INPUT BALANCE MORE... -
Page 77: I2C Diagnosis
All manuals and user guides at all-guides.com Service Mode I2C Diagnosis How to select ? Push the cursor key é or ê to highlight 'I2C' (menu 1). Press ENTER to select. The I2C Diagnosis overview will be displayed. If the indication behind the hex code is green, everything is ok. If the indication is red, something is wrong with that indicated address. -
Page 78: Programmable Function Keys
All manuals and user guides at all-guides.com Programmable Function Keys PROGRAMMABLE FUNCTION KEYS Programmable Function Keys What can be done with these keys The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. - Page 79 All manuals and user guides at all-guides.com Programmable Function Keys...
- Page 80 All manuals and user guides at all-guides.com Appendix A : Standard Source Set Up Files STANDARD SOURCE SET UP FILES NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT NAME : NAME OF FILE, CONTAINS THE 1600_48V 1600 X 600I 48,040 62,500 135,000 2160 1600 SETTINGS RESOLUTION : IMAGE RESOLUTION, WHEN...
-
Page 81: Standard Source Set Up Files
All manuals and user guides at all-guides.com Appendix A : Standard Source Set Up Files NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT MAC_POR 640 X 870 74,996 68,846 57,280 832 MUSE 1760 X 518I 30,000 33,750 37,125 2047 1760 VIDEO525 1635 X 239I 29,970 15,734 32,207 2047 1635... -
Page 82: Index
All manuals and user guides at all-guides.com Index INDEX Symbols... - Page 83 All manuals and user guides at all-guides.com Index See also...