27. Maintenance
4
5
Image 27-48
Disconnection Fans and GND
6. Remove the two Torx® screws (1&2) fixating air channel unit to starter unit and remove the bolt (3) fixating air channel unit to the
optical base.
1
3
Image 27-49
Disconnection air channel
7. Remove the air channel unit by gently lifting it up.
27.4.2.3.2 Installation of the Service Air Channel (Part of the kit)
Necessary tools
No tools.
How to install the service air channel unit
1. Place the service air channel, part of the kit, on its place in the projector without fixating it.
206
2
1
2
3
R5976820 SLM R12+ PERFORMER 08/03/2005