Table of Contents
Advertisement
27. Maintenance
7
green formatter signal connector
8
blue formatter signal connector
9
red formatter signal connector
3. Pull the wires through the opening on top of the formatter board.
Temperature sensor and Peltier elements disconnection
1. Pull out the temperature connectors 1, 2 and 3.
Image 27-77
Temperature and Peltier connection
1
blue temperature sensor connector
2
green temperature sensor connector
3
red temperature sensor connector
2. Pull out the Peltier elements connectors 4, 5 and 6.
4
blue Peltier element connector
5
green Peltier element connector
6
red Peltier element connector
3. Remove the core tube around the cable bundle. Left up both clips and pull the tube open.
224
1 3
4
2
5
6
R5976820 SLM R12+ PERFORMER 08/03/2005
Advertisement
Table of Contents
