Removing The Input Assembly; Removing The Rear Cover - Barco SLM R12 Plus Service Manual

Image 28-4
Lamp cover removal

28.2.2.2 Removing the Input Assembly

Necessary tools
A flat blade screwdriver of 5 mm
How to remove the Input Assembly
1. Loosen the 4 captive screws (A), holding Input Panel Box to projector main frame.
Image 28-5
Removal Input Panel Box
2. Take the input panel by the 2 handles (B) and pull it out the projector.

28.2.2.3 Removing the Rear Cover

How to remove the Rear Cover
1. Loosen the 3 spring screws (A), holding the back cover to projector main frame.
R5976820 SLM R12+ PERFORMER 08/03/2005
B
A
A
28. Upgrade with Air Filters
B
259