Mounting The Bottom Cover With Air Filters - Barco SLM R12 Plus Service Manual

28. Upgrade with Air Filters
Image 28-23
IR Receiver mount
2. Mount the IR Receiver unit onto the power input screening, using 2 screws (A) of the screening fixation.
3. Connect the IR Receiver (B2).
4. Reinstall the lamp power supply.

28.3.2.7 Mounting the Bottom Cover with Air Filters

To be mounted previously
The following parts have to be mounted before proceeding to the installation of the rear cover with air filters.
• Top cover ("Removing the Top Cover", page 260)
• Lamp cover ("Removing the lamp cover", page 258)
• Input assembly ("Removing the Input Assembly", page 259)
How to mount
1. Place the rear cover with air filters (A) onto the back of the projector.
Image 28-24
Mounting the rear cover with air filters
2. Secure the cover on the projector frame by turning the 3 captive screws (B) a quarter turn clockwise.
270
B
2
B
1
A
B
A
R5976820 SLM R12+ PERFORMER 08/03/2005
B