Access To Light Engine; Removing The Input Assembly; Removing The - Barco SLM R12 Plus Service Manual

27. Maintenance

27.4.2.1 Access to Light Engine

What to do to access the Light Engine
• Removal of the Input Panel box (4 screws to loosen).
• Removal of the back cover (2 spring screws to loosen).
• Removal of the top cover (4 spring screws to loosen and to disconnect the lens dust cloth).
Overview
•

Removing the Input Assembly

• Removing the Back Cover
• Removing the top cover
27.4.2.1.1 Removing the Input Assembly
Necessary tools
A flatblade screwdriver of 5 mm
How to remove the Input Assembly
1. Loosen the 4 captive screws (A), holding Input Panel Box to projector main frame.
Image 27-36
Removal Input Panel Box
2. Take the input panel by the 2 handles (B) and pull it out the projector.
27.4.2.1.2 Removing the Back Cover
How to remove the Back Cover
1. Loosen the 3 spring screws (A), holding the back cover to projector main frame.
A
Image 27-37
Removal of the back cover
2. Slide backwards the back cover to remove.
200
A
B
R5976820 SLM R12+ PERFORMER 08/03/2005