Optical Alignment Of The Lamp - Barco SLM R12 Plus Service Manual

27. Maintenance
Image 27-27
Lamp unit fixation

27.3.4.2 Optical Alignment of the lamp

What may be adjusted!!
The adjustments to the Y-axis and X-axis (balancing the light intensity) are FACTORY PREADJUSTED. Consequently, both ad-
justable screws are anchored by a lock screw and sealed with a warranty label (Destroying the label void the warranty).
ONLY the Optical readjustment to the Z-axis may be done and is recommended after the lamp has operated for many run times. An
optical realignment of the lamp to the z-axis could compensate the decrease in light output.
Image 27-28
Optical alignments scews
Necessary tools
• Allen Key 3mm
• nut driver 10mm
How to adjust
Optical alignment of the lamp to the z-axis, follow the next procedure:
1. Put a lightmeter in the center of the screen.
2. Enter the 'RANDOM ACCESS ADJUSTMENT MODE', select consecutively 'Picture Tuning' and 'Colour Temperature'. Finally
set Colour Temperature on 'PROJECTOR WHITE'.
3. Enter the 'INSTALLATION MODE' and select 'Internal Patterns'. Finally set Internal patterns on 'PURITY'.
196
A
A
A
Y
Z
R5976820 SLM R12+ PERFORMER 08/03/2005
X
Factory Preadjusted