Table of Contents
Advertisement
27. Maintenance
Product care
Installation kit. The kit R840527K is designed for use ONLY with the Barco SLM 12+ and 9+ series projectors.
Replacement parts. When replacement parts are required, be sure the service technician has used original Barco replacement parts
or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitutions may
result in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized substitutions may void warranty.
Under no circumstances are Barco parts repairable by anyone other than Barco.
Electrostatic protection
The projector uses components which can be damaged by static charges. Most semiconductors can suffer serious degrada-
tion as a result of static charges, ever though complete failure may not occur. All necessary precautions when handling static-sen-
sitive devices should be observed.
27.5.2 Access to Image Processor Unit
27.5.2.1 Removal of the Input Assembly
How to remove
1. See "Removing the Input Assembly", page 200
27.5.2.2 Removing the side panel
Necessary tools
A flatblade screwdriver of 5 mm
How to remove
1. Turn with a screwdriver the side panel lock screw a quarter turn counter clockwise.
Image 27-66
Unlocking the side cover
2. Pull the right side of the panel towards you and further to the right to remove.
218
R5976820 SLM R12+ PERFORMER 08/03/2005
Advertisement
Table of Contents
