Table of Contents
Advertisement
Image 27-107
Assemble air channel
5. Insert the two bolts (B) fixating the air channel unit to the lamp power supply house (image 27-107).
6. Connect onto the air channel the 3 engine ground leads by turning in the respective fixation screw (image 27-108).
-
(1) Ground connection top air channel
-
(2) Ground connection top air channel
-
(2) Ground connection side air channel
7. Connect the 2 fan cables on top of the unit by pushing the plug into its socket.
-
(3) Exhaust Fan
-
(4) Cooling Fan DMD Green
4
5
Image 27-108
Disconnection Fans and GND
27.5.5.2 Removing the SM Power Supply Module
Necessary tools
Flatblade screwdriver of 5mm
Inserting the SMPS module
1. Slide the module into the grooves of the projector frame.
2. Push the 3 plugs (A, B and C) on to their respective socket.
R5976820 SLM R12+ PERFORMER 08/03/2005
B (x2)
27. Maintenance
A (x10)
1
2
3
239
Advertisement
Table of Contents
