Location Of The Dust Filters; Cleaning/Replacement Of The Dust Filters; Dust Filter On The Front Side Of The Projector - Barco SLM R12 Plus Service Manual

27.2.1 Location of the Dust Filters

Where mounted?
To protect the projector against internal contamination due to forced air cooling, dust filters are mounted at the air inlet of the projector.
Therefore 2 casings are mounted on the projector, one on the front (a) and the other on the rear (B), containing an air filter.
Image 27-9
Location of the dust filters
A Dust filter at the front side of the projector
B Dust filter at the rear side of the projector
Order number Air filters
Order No
R8454096k
R84540924K

27.2.2 Cleaning/Replacement of the Dust Filters

27.2.2.1 Dust filter on the front side of the projector

Necessary tools
Philips screwdriver P1 or Flat blade screwdriver of 5 mm.
How to Remove!
1. For a table mounted projector, put one hand (A) under the filter casing (Dust filter will drops when the captive screws are loos-
ened).
Image 27-10
Release dust filter at front side
2. Loosen the 4 captive screws (B) securing filter casing to projector front.
R5976820 SLM R12+ PERFORMER 08/03/2005
A
A
Description
Air filter – 6 pack
Air filter – 24 pack
B
27. Maintenance
B
187