Table of Contents
Advertisement
27. Maintenance
27.6.3.2 Access to the controls for the alignment
How to reach
A
Air channel & Start Pulse Generator removed
Image 27-137
Access to the controls for the alignment
Image Ref.
Explanation
A
2 hexagon socket screws, blocking the light pipe holder in the light tube. These screws are accessible through
2 holes in the base frame.
B
Hexagon socket screw for adjusting the worm wheel. This screw is accessible through a hole in the base frame.
C
Light pipe adjustable screw. This alignment is FACTORY PRESET.
D
1 hexagon socket screw, blocking the light pipe in its holder. This screw is accessible through a hole in
the base frame.
27.6.3.3 Focusing the Light Spot
Necessary tools
Ballpoint Allen key of 1.5 mm and 2.5 mm.
How to focus
1. Loosen (Allen key of 1.5 mm) the 2 hexagon socket screws (A), securing light pipe support in the light tube.
Note: Ensure the hexagon socket screw (D) is still tightened.
Image 27-138
Focusing the light pipe
254
C
B
D
A
B
D
R5976820 SLM R12+ PERFORMER 08/03/2005
C
A
D
B
Advertisement
Table of Contents
