Page 2
Produced by BARCO NV, june 2001. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...
Table of Contents TABLE OF CONTENTS TABLE OF CONTENTS ...................... I-1 SAFETY INSTRUCTION RELATED TO SLM PROJECTORS ......... 1-1 Warnings ..............................1-1 Federal Communication Commission ......................1-1 Note ................................1-2 PACKAGING AND DIMENSIONS ..................2-1 Projector Packaging ............................ 2-1 Lens Packaging ............................2-2 Projector Case ............................
Page 4
Table of Contents CONNECTIONS ........................ 4-1 Power Connection to Projector ........................4-1 Input Source Connection ..........................4-3 Communication Connections ........................4-9 RS232 Connections ............................ 4-9 Communication port for communication with peripherals................4-9 Trigger output .............................. 4-9 GETTING STARTED ......................5-1 Remote Control &...
Page 5
Table of Contents RANDOM ACCESS ADJUSTMENT MODE ..............7-1 Random Access Mode ..........................7-1 Picture Service ............................7-2 Load File ..............................7-3 Edit File ..............................7-4 Rename a file .............................. 7-6 Copy a file ..............................7-7 Delete ................................. 7-8 File Options ..............................7-8 Picture Tuning .............................
Page 6
Table of Contents Shift ................................7-13 Size ................................7-14 Blanking ..............................7-15 Aspect Ratio .............................. 7-16 INSTALLATION MODE ...................... 8-1 Installation Mode ............................8-1 Input Slots ..............................8-1 800 Peripheral ............................. 8-2 Convergence ............................... 8-3 Configuration ............................... 8-4 OSD color (On-Screen Display) ........................8-4 No Signal ..............................
Page 7
Table of Contents Lamp ................................9-7 BARCO logo ............................... 9-7 Add-Ins ............................... 9-8 Preset Input Balance ........................... 9-9 Diagnosis..............................9-9 I2C Diagnosis ............................. 9-10 Formatter ..............................9-10 PROGRAMMABLE FUNCTION KEYS ................10-1 Programmable Function Keys ........................10-1 STANDARD SOURCE SET UP FILES ................A-1...
To prevent personel injury The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to BARCO. To prevent injuries and physical damage, always read this manual and all labels on the system before connecting to the wall outlet, or adjusting the projector.
Safety Note Definitions Definition Qualified service technicians or Qualified technicians : Persons having appropiate technical training and experience necessary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons.
Packaging and Dimensions Lens Packaging Way of Packaging Lenses are supplied as an individual item. They are packed in a carton. Projector Case Dimensions The dimensions are given in mm 25.4 mm = 1" ASPIUÃWD@X ,5 UHFHLYHU 6DS ÃPVU 6DS ÃDI 5976229 BARCOSLM G5 05012001...
Page 13
Packaging and Dimensions 5976229 BARCOSLM G5 05012001...
Page 14
Packaging and Dimensions 5976229 BARCOSLM G5 05012001...
Installation Guidelines INSTALLATION GUIDELINES Installation Guidelines Ambient Temperature Conditions Humidity Conditions Environment Environment condition check clean air well Special care for Laser beams Which screen type?
Installation Guidelines For more information about screens, contact your local screen supplier. What image size? How big should the image be? Projector Configurations Which configuration can be used. )URQW&HLOLQJ 5HDU&HLOLQJ 5HDU7DEOH )URQW7DEOH Image 1 Positioning the Projector Definitions of the Abbreviation on drawings...
Page 17
Installation Guidelines U h i yr U Ãvq r Ãsh p vt Ãp r vyv t U h i yr U Ãvq r Ãsh p v t Ãsy Q wrp TD9 @ÃWD@X T D9 @ÃWD@X Q wrp T p rr...
Page 18
Installation Guidelines Safety Area around the Projector ThsrÃh rhÃs Ãhv à Image 6 Re-adjusting the lamp position in the lamp casing Image 7...
Connections CONNECTIONS Power Connection to Projector AC Power (mains) cord connection Use the supplied power cord to connect the projector to the wall outlet. Plug the female power connector into the black male connector on the side of the projector. The power input is 230 VAC.
When OK (ENTER) is pressed to go on, the warning will be repeated every 30 min. The total lifetime of the lamp for a safe operation is 1500 hours max. Do not use it longer. Always replace with a same type of lamp. Call a BARCO authorized service technician for lamp replacement. Lamp Runtime Warning Using a lamp for more than 1500 hours is dangerous as the lamp could explode.
Connections Input Source Connection Input facilities 9vh t vp Ã8 qr D S Sr p r vr B rr ÃPr h v Sr qà Th qi U à h Ch q v r q u h q v rq rr ...
Connections Input module insertion into the projector To insert a module in one of the free slots, handle as follow : Power down the projector and disconnect the power cord from the wall outlet. Remove the dummy plate covering the chosen input slot by turning out both screws. Slide the input module in the free slot.
Page 29
Connections Fixed Slot (slot 1 & 2) Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through to a second projector. Within the installation mode it is possible to setup the input for 5 cable or DVI (panellink). 9vh t...
Page 30
Connections How to change the input slot setting Press ADJUST or ENTER key to start up the Adjustment mode. Push the cursor key é or ê to select Installation (menu 1) Press ENTER. Press the cursor key é or ê to select 'Input Slots' (menu 2) Press ENTER.
Page 31
Connections Serial Digital Input (slot 3 & 4) What can be connected to this input ? This input is full compatibility with digital Betacam, or other digital video sources. This avoids the need for analog video processing anywhere in the video production chain and guarantees the ultimate image quality. An active loop-through of the SDI input signal is provided for monitoring or for double and or triple stacking applications.
Page 32
Connections HD SDI Digital Input (slot 3 & 4) What can be connected to this input ? This input is full compatible with HD digital sources. This avoids the need for analog video processing anywhere in the video production chain and guarantees the ultimate image quality. An active loop-through of the HD SDI digital input signal is provided for monitoring or for double and or triple stacking applications.
Connections Communication Connections Available communication connections : RS232/422 connection between projector and computer. Communication port for communication with BARCO peripherals. Trigger output RS232 Connections RS 232/422 input and RS232/422 output of the projector. The projector has a RS232/422 input port that allows it to communicate with a computer.
Getting Started Operating the Projector Switching on (;,7 ( 17(5 67%< 3$86( 7( ;7 )5((= +( /3 3+$6( " 6+$531 (66 7,17 &2/25 (;,7 67$1'%< %5,* +71(66 (17(5 &2175$67 7(;7 3$86( 6+$531 7,17 %5,*+71 3+$6( &2/25 &2175$67 D Lamp Run Time Indication REMAINING LAMP RUN TIME 30 h Lamp run time is 1500 hours.
Getting Started Lamp Light Output Indication ENTER WARNING Lamp run time is 1400 hours. The light output of the lamp is less than 50% of its initial value. It is advisable to replace the lamp before damage occurs. <ENTER> to confirm Switching to Stand-by.
Getting Started Quick Lens Adjustment é ê ç è EXIT ENTER LENS ADJUSTMENT ZOOM/FOCUS ZOOM with éor ê FOCUS with çor è <ENTER> to Shift <EXIT> to return ENTER é ê ç è EXIT ENTER LENS ADJUSTMENT SHIFT SHIFT with éor ê, çor è <ENTER>...
Getting Started Quick On Screen Color change ENTER é ê ENTER é ê ENTER é ê ENTER ADJUSTMENT MODE INSTALLATION OSD COLOR HIGHLIGHTED ITEM Select a path from below : INPUT SLOTS 800 PERIPHERALS CONFIGURATION GREEN RANDOM ACCESS OSD COLOR YELLOW INSTALLATION NO SIGNAL...
Getting Started Directly to the IR Sensors DSÃr DSÃr 7DEOH TvqrÃsà wrp Srh Ãsà wrp A Ãsà wrp Y D U ( 1 7 (5 9 9 S ) 5 ( (= U 7 ` U @ Y Y D U ( 17 (5 9 9 S...
Getting Started Display the Projector Address on the Screen ADDRESS PROJECTOR ADDRESS How to Program an Address into the RCU ? ADDRESS Controling the Projector Input Selection Picture Contols Brightness Control 'brightness' Contrast Control Color Saturation Tint Control Sharpness Control.
Page 44
Getting Started Phase Control The Pause key. The Stand-by key.
Start up of the Adjustment Mode START UP OF THE ADJUSTMENT MODE Adjustment Mode Start up All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode'. Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the 'Adjustment Mode'.
Page 46
Start up of the Adjustment Mode When the password is correct, you gain access to the selected item. When the password is wrong. The error message "Invalid password" is displayed on the screen. Press EXIT to continue and to return to the Service menu. Error Invalid password <EXIT>...
Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE Random Access Mode Starting up ENTER ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with é or ê then <ENTER> <EXIT> to return. Overview Flowchart...
Random Access Adjustment Mode Picture Service Connecting a new Source. Start up the File Service. é ê ENTER EXIT ADJUST RANDOM ACCESS FILE SERVICE ADJUSTMENT MODE LOAD FILE SERVICE EDIT PICTURE TUNING RENAME GEOMETRY COPY DELETE OPTIONS Select with é or ê Select with é...
Random Access Adjustment Mode Load File Start up the Load File. é ê ENTER è ç ENTER FILE SERVICE LOAD FILE FILTER LIST [All] LOAD Filename Resolution EDIT ----------------------------------------------------- RENAME Video525.s01 1 675x240i COPY Video525.c01 1 675x240i DELETE Video525.c02 1 675x240i OPTIONS -----------------------------------------------------...
Random Access Adjustment Mode Edit File What can be done with the Edit File menu ? How to start up the EDIT menu ? é ê ENTER ENTER FILE SERVICE EDIT FILE LOAD Filename Resolution EDIT ----------------------------------------------------- RENAME Video525.s01 1 675x240i COPY Video525.c01 1...
Random Access Adjustment Mode How to find the correct values for the displayed item? Caution : Do not adjust these settings on an active file, they are used to identify the input source file. "Horizontal Total Pixels" "Active Pixels" "Horizontal Start "Horizontal Period"...
Random Access Adjustment Mode Field Polarity ENTER Field Select ENTER Vertical Refresh [sync/async] EXIT CONFIRM EDIT FILE Save changes to file xga.c30? <ENTER> to confirm <EXIT> to return ENTER EXIT Rename a file Start Up. é ê ENTER é ê ENTER RENAME FILE RENAME FILE...
Random Access Adjustment Mode How to change the characters ? ç è é ê ENTER EXIT RENAME FILE Frome file name : Video525.s01 To file name : demo.c10 Select with ç or è Reprogram with é or ê or numeric keys <ENTER>...
Random Access Adjustment Mode Delete Start Up é ê ENTER é ê ENTER ENTER EXIT FILE SERVICE DELETE FILE CONFIRM DELETE FILE LOAD Filename Resolution EDIT ----------------------------------------------------- Delete file: RENAME Video525.s01 1 675x240i Video525.c01? COPY Video525.c01 1 675x240i DELETE Video525.c02 1 675x240i OPTIONS [ALL]...
Random Access Adjustment Mode Picture Tuning Start Up é ê ENTER RANDOM ACCESS PICTURE TUNING ADJUSTMENT MODE CTI [ON] COLOR TEMPERATURE FILE SERVICE GAMMA PICTURE TUNING DECODING [EBU] GEOMETRY DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with é or ê Select with é...
Random Access Adjustment Mode Color Temperature Start Up é ê ENTER PICTURE TUNING COLOR TEMPERATURE CTI [ON] PROJECTOR WHITE COLOR TEMPARATURE COMPUTER 9300K GAMMA VIDEO 6500K DECODING [EBU] FILM 5400K DYNAMIC COLOR DEPTH BROADCAST 3200K NOISE REDUCTION INPUT BALANCE CUSTOM BALANCE Select with é...
Random Access Adjustment Mode How to change the Gamma Value ? é ê ENTER ç è EXIT PICTURE TUNING GAMMA = 2.2 CTI [ON] COLOR TEMPERATURE GAMMA menu 3 DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with é or ê then <ENTER>...
Random Access Adjustment Mode Noise Reduction Purpose : To change the noise reduction value : é ê ENTER ç è EXIT PICTURE TUNING NOISE REDUCTION CTI [ON] COLOR TEMPERATURE GAMMA menu 2 DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with é...
Random Access Adjustment Mode How to adjust the input balance for YUV input signals? Important é ê é ê ENTER é ê ç è PICTURE TUNING INPUT BALANCE INPUT BALANCE CTI [ON] WHITE BALANCE WHITE BALANCE COLOR TEMPERATURE BLACK BALANCE BLACK BALANCE GAMMA DECODING [EBU]...
Random Access Adjustment Mode Shift What can be done ? To start up the shift action : é ê ENTER é ê ç è GEOMETRY SHIFT SIZE BLANKING ASPECT RATIO [4:3] Select with é or ê then <ENTER> <EXIT> to return. menu 1 Size What can be done ?
Random Access Adjustment Mode Blanking What can be done ? Available Blanking Adjustment. UÃiyhxvt SvtuÃiyhxvt GrsÃiyhxvt 7Ãiyhxvt Adjusting the blanking. é ê ENTER é ê ENTER BLANKING GEOMETRY SHIFT BOTTOM SIZE LEFT BLANKING RIGHT ASPEC RATIO [4:3] Select with é or ê Select with é...
Random Access Adjustment Mode Aspect Ratio What can be done? Setting Up the Aspect Ratio. é ê ENTER GEOMETRY SHIFT SIZE BLANKING ASPEC RATIO [4:3] Select with é or ê then <ENTER> <EXIT> to return. menu 1...
Installation Mode INSTALLATION MODE Installation Mode Start Up Push the cursor key é or ê to highlight 'Installation Mode' and then press ENTER. ADJUSTMENT MODE INSTALLATION Select a path from below : INPUT SLOTS 800 PERIPHERAL CONVERGENCE RANDOM ACCESS CONFIGURATION INSTALLATION OSD COLOR SERVICE...
Installation Mode Component video Component Video - SS : component video with separate sync Component Video - SOY : component video with sync on Y Component Video - 3LSS : component video with 3 level separate sync. Component Video - 3LSOY : component video with 3 level sync on Y. RGB analog with tri-level sync RGB-SS[3LSS] : RGB with separate Tri level sync...
Installation Mode Defining the Infrared Communication protocol When a peripheral is connected to the 'Comm Port', the communication can be in PPM or RC5. The type of communication can be set to : - PPM - RC5 To define the communication : Push the cursor key é...
Installation Mode Configuration What can be done ? The way of physical installation of the projector can be defined to the projector. The following installation configurations are possible : - front/table - front/ceiling - rear/ceiling - rear/table Set up the Correct Configuration Push the cursor key é...
Installation Mode No Signal What will happen If there is no signal connect to the projector, - the background color can be black or blue and - the projector can shutdown after a certain time. Changing the Background Color To change the background color handle as follow : Push the cursor key é...
Installation Mode Internal Patterns What can be done with these internal patterns ? The projector is equipped with different internal patterns which can be used for measurment and alignment purposes. How to select an internal pattern ? Push the cursor key é or ê to highlight 'Internal Patterns' (menu 1). Press ENTER to display the Internal Pattern selection menu.
Installation Mode Zoom/Focus/Shift Within the displayed pattern it is possible to adjust the Zoom/Focus and the Shift. Use the ENTER key to toggle between Zoom/Focus and Shift operation. How to Zoom/Focus ? Push the cursor key é or ê to select Zoom/Focus (menu 1) Push the cursor key é...
Installation Mode Options The zoom/focus and shift can be set the same for all files. Push the cursor key é or ê to highlight 'Options' (menu 1). Press ENTER to select. The Lens Options menu will be displayed (menu 2). Press ENTER to toggle between 'Yes' or 'No'.
Installation Mode Menu Position What can be done ? The adjustment menus can be displayed in the corner or in the middle of the image. How to set up? Push the cursor key é or ê to highlight 'Menu Position' (menu 1). Press ENTER to toggle between [DEFAULT] and [CENTER].
Select with é or ê <ENTER> to confirm then <ENTER> Select with é or ê <EXIT> to return <EXIT> to return. Select with é or ê then <ENTER> <ENTER> to toggle <EXIT> to return. <EXIT> to return. 5976229 BARCO SLM G5 10052001...
- projector serial number - projector run time Detailed description - type of projector : BARCO SLM R6 - software version - Proj. Address : to change the address of the projector, see Change Projector Address in this chapter. - Installation : possible installations :...
Depending on your password level some password protected items are accessible and others not. The owner (which has the highest level) can set up via the 'Access control list' the accessibility of the different items. See 'Access Control List'. 5976229 BARCO SLM G5 10052001...
1 menu 3 An access level can be added to the following items : Adjustment mode Barco logo Change projector address File delete File delete all Input balance Installation Random access Serial communication Service 5976229 BARCO SLM G5 10052001...
INTERFACE STANDARD [RS232] CHANGE PROJ. ADDRESS RS422 TERMINATION [ON] SERIAL COMMUNICATION LAMP MORE... Select with é or ê Select with é or ê then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. menu 2 menu 1 5976229 BARCO SLM G5 10052001...
Press ENTER to toggle between ON and OFF. Default setting : ON SERIAL COMMUNICATION PROJECTOR ADDRESS 001 BAUDRATE [115200] INTERFACE STANDARD [RS232] RS422 TERMINATION [ON] Select with é or ê then <ENTER> <EXIT> to return. menu 1 5976229 BARCO SLM G5 10052001...
Push the cursor key é or ê to highlight 'BARCO logo' (menu 1). Press ENTER to select. The BARCO logo menu will be displayed on the screen (menu 2. Within this menu, three toggle settings and a shift control are available.
OFF : no key on the RCU is used to display the BARCO logo. TEXT : the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in operational : mode).
SERVICE DIAGNOSIS BARCO LOGO ADD-INS FORMATTER PRESET INPUT BALANCE DIAGNOSIS MORE... Select with é or ê Select with é or ê then <ENTER> then <ENTER> <EXIT> to return. <EXIT> to return. menu 1 menu 2 5976229 BARCO SLM G5 10052001...
An overview of the working of the formatter will be displayed (menu 2). DIAGNOSIS FORMATTER I2C (34H) CONFIGURATION FORMATTER INITIALISATION SELF TEST RED DISPLAY GREEN DISPLAY BLUE DISPLAY Select with é or ê <EXIT> to return. then <ENTER> <EXIT> to return. menu 2 menu 1 9-10 5976229 BARCO SLM G5 10052001...
3. Press ENTER to confirm. 4. The function key is available in the operational mode. CONFIRM QUICK ACCESS <F1> will be used to quickly access this menu. <ENTER> to confirm <EXIT> to cancel. menu 1 10-1 5976229 BARCO SLM G5 05012001...