Table 4: Dhcp Service Configuration Pages Summary - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Table 4: DHCP Service Configuration Pages Summary

Field
DHCP Pool Information
DHCP Subnet (required)
Address Range (Low)
(required)
Address Range (High)
(required)
Exclude Addresses
Lease Time
Maximum Lease Time
(Seconds)
Default Lease Time
(Seconds)
Server Information
Server Identifier
Domain Name
Domain Search
DNS Name Servers
8
Function
Specifies the subnet on which DHCP is
configured.
Specifies the lowest address in the IP address
pool range.
Specifies the highest address in the IP address
pool range.
Specifies addresses to exclude from the IP
address pool.
Specifies the maximum length of time a client
can hold a lease. (Dynamic BOOTP lease
lengths can exceed this maximum time.)
Specifies the length of time a client can hold a
lease for clients that do not request a specific
lease length.
Specifies the IP address of the DHCP server
reported to a client.
Specifies the domain name that clients must
use to resolve hostnames.
Specifies the order—from top to bottom—in
which clients must append domain names
when resolving hostnames using DNS.
Defines a list of DNS servers that the client can
use, in the specified order—from top to bottom.
Your Action
Type an IP address prefix.
Type an IP address that is part of the subnet
specified in DHCP Subnet field .
Type an IP address that is part of the subnet
specified in DHCP Subnet. This address must
be greater than the address specified in the
Address Range (Low) field.
To add an excluded address, type the
address next to the button, and click
Add
To delete an excluded address, select the
address in the Exclude Addresses box, and
click Delete .
Type a number from 60 through 4,294,967,295
(seconds). You can also type infinite to specify
a lease that never expires.
Type a number from 60 through 2,147,483,647
(seconds). You can also type infinite to specify
a lease that never expires.
Type the IP address of the server. If you do not
specify a server identifier, the primary address
of the interface on which the DHCP exchange
occurs is used.
Type the name of the domain.
To add a domain name, type the name next
to the button, and click
Add
To delete a domain name, select the name
in the Domain Search box, and click
To add a DNS server, type an IP address next
to the button, and click
Add
To remove a DNS server, select the IP
address in the DNS Name Servers box, and
click .
Delete
Copyright © 2017, Juniper Networks, Inc.
.
Add
.
Add
.
Delete
.
Add