Grounding And Providing Power To The Router; Tools And Parts Required; Grounding The Router - Juniper MX240 Hardware Manual

Chapter 9
Grounding and Providing Power to the
Router

Tools and Parts Required

Tools and Parts Required on page 53
Grounding the Router on page 54
Connecting Power to an AC-Powered Router on page 54
Powering On an AC-Powered Router on page 55
Connecting Power to a DC-Powered Router on page 56
Powering On a DC-Powered Router on page 58
Powering Off the Router on page 59
To ground and provide power to the router, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (-) screwdriver
3/8-in. nut driver or hexagonal-head external drive socket wrench, with a torque
range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque, for
tightening nuts to terminal studs on each power supply (on a DC-powered router)
CAUTION: Do not substitute a metric nut driver or wrench. A tool that does not fit
the nuts exactly can damage them. You must use a 3/8-in. tool.
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap

Tools and Parts Required

53