Configuring System Data - Nortel Meridian Meridian 1 Installation Manual

Table 4
Failure codes (Part 2 of 2)
Failure code
7
8
9
SNPPHelp properties
The Help file contains plain text that is sent to the SNPP client when the client
enters a help command on a SNPP connection. This file can be changed at the
administrator's discretion.

Configuring system data

Before starting the DECT Messaging System, the data for the DECT system
and all handsets must be entered in the database. To configure the DECT
system and handsets, follow the steps in Procedure 6.
Procedure 6
Configure DECT system and handsets
1 Start Jboss by double clicking on the shortcut on the desktop. If Jboss
starts correctly, then continue with this procedure. If it does not, refer
to "Installing the DECT Messaging system" on page 15.
Configuring the software Page 47 of 60
Timed out.
Other errors.
Handset rejected the call.
CAUTION
This caution applies to DECT Messaging that is
installed on a Windows 2000 PC.
Left-clicking in a command interpreter window
causes it to enter selection mode. The DECT
Messaging application is halted, and does not
function. To cancel the selection mode, right-click
on the command interpreter window.
Definition
DECT Messaging Installation Guide