Daikin FTX-N/U Manual page 465

FTX-N/U, FVXS-N, FDMQ-R Series
For type A models
Location and number of holes
Bottom frame: 2
Plate (Insert the plate under the heat exchanger.)
C
Hole (Fix with the
View C
For type B and C models
Location and number of holes
Bottom frame: 1
Partition plate: 2
Plates (Insert the plates under the heat exchanger.)
C
Hole (Fix with the
View C
Remove 1 screw. (Hexagon tapping screw)
Installation Procedure (3)
Heat exchanger
A Drain pan heater
D
B M4 piercing screw.)
Remove 1 screw. (Hexagon tapping screw)
Heat exchanger
Drain pan heater
A
D
B M4 piercing screw.)
View D
B M4 piercing screw
View D
B M4 piercing screws
463
EDUS091558E
Hole
Bottom frame
Ground plate
(The ground
plate should be
installed
so that it rmly
adheres to the
bottom frame.)
Partition plate
Holes
Ground plate
(The ground plate should be
installed so that it rmly
adheres to the partition plate.)
3P421082-1C