Daikin FTX-N/U Manual page 151

FTX-N/U, FVXS-N, FDMQ-R Series
12.6 <BRC082A43> Wireless Remote Controller
1. SAFETY CONSIDERATIONS.......................................... 2
2. BEFORE INSTALLATION ................................................ 2
3. REMOTE CONTROLLER INSTALLATION ...................... 2
4. RECEIVER INSTALLATION............................................. 3
5. FIELD SETTING .............................................................. 6
6. TEST OPERATION.......................................................... 6
1. SAFETY CONSIDERATIONS
Please read these "SAFETY CONSIDERATIONS" carefully
before installing air conditioning equipment and be sure to
install it correctly. After completing the installation, make sure
that the unit operates properly during the start-up operation.
Please instruct the customer on how to operate the unit and
keep it maintained.
Also, inform customers that they should store this installation
manual along with the operation manual for future reference.
This air conditioner comes under the term "appliances not
accessible to the general public".
Meaning of warning, caution and note symbols.
WARNING ............. Indication a potentially hazardous sit-
CAUTION .............. Indication a potentially hazardous sit-
NOTE .................... Indication situation that may result in
WARNING
• Perform installation work in accordance with this instal-
lation manual.
Improper installation may result in electric shocks or fire.
• Be sure to use only the specified accessories and parts
for installation work.
Failure to use the specified parts may result in, electric
shocks, fire or the unit falling.
• Before touching electrical parts, turn off the unit.
• Do not touch the switch with wet fingers.
Touching a switch with wet fingers can cause electric shock.
CAUTION
• Refer also to the installation manuals attached to the
indoor unit and the decoration panel.
• Confirm that the following conditions are satisfied prior
to installation.
Ensure that nothing interrupts the operation of the wireless
remote controller. (Ensure that there is neither a source of
light nor fluorescent lamp near the receiver. Also, ensure that
the receiver is not exposed of direct sunlight.)
Ensure that the operation display lamp and other indicators
are easy to see.
CONTENTS
uation which, if not avoided, could
result in death or serious injury.
uation which, if not avoided, may
result in minor or moderate injury. It
may also be sued to alert against
unsafe practices.
equipment or property-damage-only
accidents.
• The installation position of this receiver is one corner of
the decoration panel. Therefore, confirm that its position
is set so that the signal from the wireless remote control-
ler can be easily transmitted and its display can be easily
seen.
• If both this kit and fresh air intake kit are installed, only
one duct chamber shall be used. Refer to the installation
manual of the fresh air intake kit (optional hand book).
2. BEFORE INSTALLATION
2-1 ACCESSORIES
Check if the following accessories are included with the unit.
Name (1) Receiver
Quantity 1 pc.
Shape
(4) Dry cell battery
Name
LR03 (AM4)
Quantity 2 pcs.
Shape
(7) Mounting
Name
screw (Black)
Quantity 2 pcs.
Shape
M4
Name (10) Winged bar
Quantity 1 pc.
Shape
2-2 NOTE TO THE INSTALLER
Be sure to instruct the customer how to properly operate the
system showing him/her the attached operation manual.
3. REMOTE CONTROLLER INSTALLATION
<Installing wireless remote controller>
• Do not throw the remote controller or impose large shocks.
Also, do not store where it may be exposed to moisture or
direct sunlight.
149
EDUS091558E
(2) Wireless remote (3) Remote
controller controller holder
1 pc. 1 pc.
(6) Screw for install-
(5) Unit No. label ing remote con-
troller holder
1 pc. 2 pcs.
1 2 3
1 2 3
1 2 3
M3.5
(8) Mounting (9) Paper pattern
screw printing
2 pcs. 1 pc.
M5
3-15/16×1-15/16 (in.)
(11) Operation (12) Installation
manual manual
1 pc. 1 pc.
3P510049-1A
2