Daikin FTX-N/U Manual page 203

FTX-N/U, FVXS-N, FDMQ-R Series
Adjusting the Airflow Direction
NOTE
Notes on airflow direction setting
• The movable range of the flap varies according to the operation mode.
• The flap will stop at the upper position when the airflow rate is changed to low during the
up and down swing setting.
01_EN_3P379751-4C.indd 14
You can adjust the airflow direction to increase your comfort.
CAUTION
• Always use a remote controller to adjust the angles of the flap. Moving the flap forcibly by hand may cause a
malfunction.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
To start auto swing
Up and down airflow direction
Press �
• " " is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
To set the flap at the desired position
• This function is effective while the flap is in auto swing mode.
Press when the flap reaches the desired
position�
• " " disappears from the LCD.
To adjust the louvers at desired position
Hold the knobs and move the louvers (vertical blades)�
FTX09NMVJU / FTX12NMVJU
FTXN09NMVJU / FTXN12NMVJU
Knobs
Knobs
201
Basic Operation
FTX15NMVJU / FTX18NMVJU / FTX24NMVJU
FTXN18NMVJU / FTXN24NMVJU
Knobs
Knobs
Movable range of the flap
COOL / DRY
FAN ONLY
EDUS091558E
HEAT
14
C: 3P379751-4C
11/6/2015 16:14:38