Daikin FTX-N/U Manual page 261

FTX-N/U, FVXS-N, FDMQ-R Series
Read Before Operation
Preparation Before Operation
2
3
1
Remote controller
Screws
Remote
controller holder
NOTE
Notes on batteries
• When replacing the batteries, use batteries of the same type, and replace both old batteries together.
• The batteries will last for about 1 year. However, if the remote controller display begins to fade and the possible transmission range becomes
shorter within a year, replace both batteries with new, size AAA.LR03 (alkaline) batteries.
• The batteries supplied with the remote controller are for initial operation. The batteries may run out in less than 1 year.
Note on remote controller
• Do not drop the remote controller. Do not get it wet.
9
01_EN_3P379751-5D.indd 9
To insert the batteries
1.
Slide the front cover to take it off�
+
Position and
–
correctly!
2.
Insert 2 dry batteries AAA.LR03 (alkaline).
3.
Replace the front cover�
To fi x the remote controller holder to a wall
1.
Choose a place where the signals reach the
unit�
2.
Attach the holder to a wall, a pillar, or similar
location with the screws supplied with the
holder�
3.
Place the remote controller in the remote
controller holder�
Fahrenheit/Celsius display switch
Press
simultaneously for about 5 seconds.
• The temperature will be displayed in Celsius when it is presently displayed in
Fahrenheit, and vice versa.
• The switch operation is only possible when the temperature is being displayed.
and (TIMER button)
259
EDUS091558E
C: 3P379751-5D
11/13/2018 2:17:04 PM