Daikin FTX-N/U Manual page 353

FTX-N/U, FVXS-N, FDMQ-R Series
01_EN_3P510048-1A.fm Page 10 Wednesday, December 27, 2017 2:27 AM
3
MODE
Press OPERATION MODE SELECTOR button.
" " on the left-hand of the malfunction code blinks.
4
DOWN
UP
Press PROGRAMMING TIMER button and change the
malfunction code.
Press until the indoor unit 2 beeps.
5
MODE
Press OPERATION MODE SELECTOR button.
" " on the right-hand of the malfunction code blinks.
6
DOWN
UP
Press PROGRAMMING TIMER button and change the
malfunction code.
Press until the indoor unit makes 1 long beep.
The malfunction code is fixed when the indoor unit makes 1 long
beep.
7
MODE
Reset of the display
Press OPERATION MODE SELECTOR button to get
the display back to the normal state.
IN CASE BESIDES EMERGENCY STOP
• The unit does not operate at all.
• Check if the receiver is exposed of sunlight or strong light.
Keep receiver away from light.
• Check if there are batteries in the remote controller. Place
the batteries.
• Check if the indoor unit number and wireless remote con-
troller number are equal.
Number
Operate the indoor unit with the remote controller of the same
number.
Signal transmitted from 1 remote controller of a different number
cannot be accepted. (If the number is not mentioned, it is con-
sidered as "1".)
The system operates but it does not sufficiently cool or
heat.
• If the set temperature is not proper. (See page 7)
• If the FAN SPEED is set to LOW SPEED. (See page 7)
Contact the place of purchase in the following case.
10
WARNING
When you detect a burning odor, shut OFF power immedi-
ately and contact the place of purchase. Using the equipment
in anything but proper working condition can result in equip-
ment damage, electric shock or fire.
Trouble]
[
The OPERATING INDICATOR lamp of the indoor unit is
flashing and the unit does not work at all.
Unit No. which
sensed trouble
CODE
UNIT N
INSPECTION
display
Check the malfunction code (A1 - UF) on the remote controller
and contact the place of purchase. (Refer to indoor unit installa-
tion manual.)
351
EDUS091558E
Malfunction Code
ON OFF
TEMP
TIME
UP
DOWN
FAN
RESERVE CANCEL
.
O
TIMER
MODE
/TEST
3P510048-1A