Daikin FTX-N/U Manual page 137

FTX-N/U, FVXS-N, FDMQ-R Series
● To prevent electrical noise and possible communication errors, avoid installing the
remote controller wiring parallel to or in the vicinity of line voltage circuits.
3-6 Installation procedure for the lower case.
When wiring the remote controller through the top center or rear access points, attachment of the
wire to the lower case is required before it is wall mounted. Closely follow the wiring
procedures.
3-6-1 Wall installation
Secure by using furnished drywall anchors and screws (2 pcs.).
Drywall screws
3-6-2 Switch box installation
Secure by using  eld supplied machine screws (2 pcs.).
● Install the control on a  at surface only.
● To prevent deformation of the lower case, avoid over-tightening the installation screws.
8
01_EN_3P243521-7L.indd 8
NOTE
Switch box
(field supply) or
(use optional accessory
KJB211A)
NOTE
Machine screws (field supply) or
(use optional accessory KJB211A)
135
Drywall anchors
[Unit : inch (mm)]
Switch box
1-13/16
(46)
11/27/2014 11:21:43 AM
EDUS091558E
3P243521-7L