Daikin FTX-N/U Manual page 368

FTX-N/U, FVXS-N, FDMQ-R Series
DAILY timer
After programming, the system starts and stops each day at the preset times. Two pairs of time settings
can be programmed.
(Example: 8:00
1
Press
2
Make the ON and OFF time settings.
Program example: 8:00
Settings
ON time setting
When the timer
used, save the setting
as
1
OFF time setting
ON time setting
When the timer
used, save the setting
as
2
OFF time setting
3
Press
If the following appears on the display, the timer must be reprogrammed.
This means that Timers
programmed for the same time settings.
New time settings must be made.
14
~ ~
10:00, and 18:00 23:00)
to select the DAILY timer.
~
10:00, and 18:00
Procedure
is not
1
is not
2
. The DAILY timer is now programmed.
Note
The 24-hour timer display
is blinking.
and are
DAILY timer indication appears.
lights up.
Take the steps from to
~
23:00
Press Press
The 24-hour timer display
is blinking.
This means that the timer has not been
programmed yet.
366
EDUS091558E
.
to make the
timer setting.
3P202922-2B