Daikin FTX-N/U Manual page 269

FTX-N/U, FVXS-N, FDMQ-R Series
TIMER Operation
ON/OFF TIMER Operation
NOTE
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• When using the ON/OFF TIMER to start/stop operation, the actual operation start/stop time may differ from the time set. (Maximum of about
10 minutes)
In the following cases, set the timer again�
• After the circuit breaker has turned off.
• After a power failure.
• After replacing the batteries in the remote controller.
17
01_EN_3P379751-5D.indd 17
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use the ON TIMER and OFF TIMER
together.
To use ON TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1.
Press �
" " is displayed on the LCD.
" " blinks.
• " " and day of the week disappear from the LCD.
2.
Press until the time setting reaches the point
you like�
• Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the setting rapidly.
3.
Press again�
• " " and setting time are displayed on the LCD.
• The TIMER lamp lights orange.
Display
To cancel ON TIMER operation
Press �
• " " and setting time disappear from the LCD.
• " " and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
267
Page 10
EDUS091558E
C: 3P379751-5D
11/13/2018 2:17:13 PM