Daikin FTX-N/U Manual page 361

FTX-N/U, FVXS-N, FDMQ-R Series
Automatic · DRY · Cooling · Heating Operation
Select your desired operation mode.
Once preset, the system can get restarted in the same operation mode.
1
Press
operation mode.
Each time the button is pressed, the mode
changes as follows.
(Automatic)
(Heating)
(DRY)
The system does not have the FAN mode.
2
Press
The run indicator lamp lights up.
To stop the operation:
Press
The run indicator lamp goes out.
Automatic operation
In Automatic, the temperature setting and
operation mode (DRY, Cooling or Heating) are
automatically selected according to the room
temperature and outdoor temperature at the
time of starting operation.
to select your desired
Heat pump
(DRY)
model
(Cooling)
Cooling only
(Cooling)
model
.
again.
Run indicator lamp (green)
DRY operation
In this mode, humidity is removed from the air.
Note
While running in the DRY mode, you may
feel cool or warm air from the air outlet. In
this case, readjust the airflow direction with
the vertical airflow direction louvers. (except
Duct Connected type)
359
EDUS091558E
2
1
7
3P202922-2B