FTX-N/U, FVXS-N, FDMQ-R Series
Quick Reference
The main menu has the following items.
Air ow Direction
Individual
Air ow
Direction
(depends on
indoor unit model)
Ventilation
Ventilation
operation settings
for energy
recovery ventilator
Schedule
Off Timer
Celsius / Fahrenheit
20
01_EN_3P243520-7Q.indd 20
Menu item
Used to con gure air ow direction
settings.
●
●
*
Set the air ow direction individually for each
of the 4 louvers.
Louver Setting
●
Setting table for louver.
Louver Setting List
Reset All Louvers
Reset all louvers to factory default setting.
Position
Used to set "Low" or "High"
Ventilation Rate
Used to set Auto, ERV, or Bypass.
Ventilation Mode
●
Daily Patterns
●
Settings
●
Used to set the run-time for the indoor unit
using this controller.
●
●
Description
The air ow direction louver is automatically
operated up and down (left and right).
The xed air ow directions are con gurable
for ve positions.
This function is not available on all indoor unit
models.
Maximum 16 units (unit 0 till 15).
Day settings are selected from four patterns, i.e.,
"7Days", "Weekday/Sat/Sun",
"Weekday/Weekend", and "Everyday".
Set the startup time and operation stop time.
ON:
Startup time, cooling and heating
temperature setpoints can be
con gured.
OFF: Operation stop time, cooling and
heating setback temperature
setpoints can be con gured.
( --: Indicates that the setback
function is disabled for this time
period. )
_:
Indicates that the temperature
setpoint and setback temperature
setpoint for this time period is not
speci ed. The last active setpoint will
be utilized.
Up to ve actions can be set for each day.
Possible to set in 10 minute increments from
30 to 180 minutes.
Used to select whether temperature values
will be displayed in Celsius or Fahrenheit.
312
EDUS091558E
Reference page
23
25
26
27
28
29
31
32
35
–
3P243520-7Q
3/2/2015 5:36:36 PM