Daikin FTX-N/U Manual page 310

FTX-N/U, FVXS-N, FDMQ-R Series
Basic Operation
4
5
Setting the Cool / Heat Changeover Master
Setting Changes
1
Cool
Return
Cool
Return
16
01_EN_3P243520-7Q.indd 16
● Press On/Off button.
The Operation lamp will illuminate solid
On/Off
green and the system will start
operating.
● When On/Off button is pressed again,
the system will stop operating and the
On/Off
Operation lamp will turn off.
See page 18 for an explanation of the cool/heat changeover master indoor unit.
● Press Mode button on the remote
controller of the changeover master
Set to
74
indoor unit for at least four seconds
F
while the backlight is illuminated.
Setting
● The "
MASTER
MASTER
CONTROLLED
CONTROLLED
indoor units connected to the same outdoor unit or
Set to
74
Branch Selector unit will start  ashing.
F
* Vent mode setting changes are possible regardless of the cool/
Setting
heat changeover master indoor unit.
* If the outdoor unit is con gured as cool/heat changeover master,
all remote controllers serving the associated indoor units will
display its "
● Set the cool/heat changeover master indoor unit as
outlined below.
" icon on each remote controller for the
" icon.
MASTER
CONTROLLED
308
EDUS091558E
(VRV only)
3P243520-7Q
3/2/2015 5:36:33 PM