Daikin FTX-N/U Manual page 266

FTX-N/U, FVXS-N, FDMQ-R Series
Air outlet selection
• Make air outlet selection according to what suits you.
When setting the air outlet selection switch to
• Air conditioner automatically decides the appropriate blowing pattern depending on the operating mode/situation.
Mode
COOL
( )
HEAT
( )
DRY
( )
FAN
( )
AUTO
( )
When setting the air outlet selection switch to
• Regardless of the operating mode or situation, air is emitted from the upper air outlet.
• Use this switch when you do not want air coming out of the lower air outlet. (While sleeping, etc.)
01_EN_3P379751-5D.indd 14
Situation
When the operation is activated or when the
room is not fully cooled.
When the room has become fully cool, or
when 1 hour has passed since turning on the
air conditioner.
When the operation is activated or when air
emitted is of low temperature.
At times other than the above situations.
Whenever in DRY mode.
Whenever in FAN mode.
Operates in the actual operation mode of the air conditioner according to the descriptions in this table. (COOL or HEAT)
Page 6
Blowing pattern
Air is emitted from the upper and lower air
outlets in order to reach the set temperature
quickly.
Air is emitted only from the upper air outlet so
that air does not come into direct contact with
people and indoor temperature is equalized.
Air is emitted only from the upper air outlet so
that air does not come into direct contact with
people.
Air is emitted from the upper and lower air
outlets so that warm air is spread throughout the
whole room.
Air is emitted only from the upper air outlet so
that air does not come into direct contact with
people.
264
EDUS091558E
Basic Operation
14
C: 3P379751-5D
11/13/2018 2:17:09 PM