Daikin FTX-N/U Manual page 463

FTX-N/U, FVXS-N, FDMQ-R Series
Drain pan heater
A
M4 piercing screw
B
C Binding band
Sealing material
D
Electric drill
WARNING
Be sure to check that the power supply of the product is turned off.
Some stages in the installation procedure differ by
model of outdoor unit. Refer to the instructions for the
relevant model.
Type A models
Type B models
Type C models
1.
Remove each component of
the outdoor unit.
1) Remove the top plate.
2) Af x the
F
where there is enough space available on
the back of the top plate.
3) Remove the screws from the protective
wire mesh if one is tted. (2 screws)
(For type B and C models only)
4) Remove the front plate.
5) Remove the anti-drip cover.
(For type B and C models only)
6) Af x the
G
manufacture's label.
The appearance of the outdoor unit and
the number of screws may differ from some
models.
Screw types for each component are
indicated as below.
o icon: Hexagon tapping screw
: Truss head tapping screw
Accessories
KEH067A41E KEH063A4E
FTDBHMS
1
3
1
1
Tools Required for Installation
1/8 inch ( 3.2mm) drill
Installation Procedure (1)
: R /12 R /12 R L /12
: R 15/18/24 R 18/24 R L15
: 2/3/4M S 2/3M L R 3 /36
electric wiring diagram label
information label near the
FTDBHML
Installation manual
E
(multi-language)
1
Electric wiring
F
6 diagram label
G Information label
1
Appearance of the
2
models.
Phillips screwdriver
For type A models
Electric wiring
F
diagram label
For type B and C models
Electric wiring
F
diagram label
A
View A
Protective
wire mesh
461
KEH067A41E KEH063A4E
FTDBHMS FTDBHML
1
1
1
A drain pan heater may differ from some
ippers
Top plate
Front plate
Top plate
Anti-drip cover
Front plate
EDUS091558E
1
1
1
Information
G
label
Information
G
label
3P421082-1C